Roofing Construction & Estimating, Revised Free Test

(Roofing)

Knowledge needed for multiple states for Roofing licenses.

Welcome to the free timed practice test on Roofing Construction & Estimating, Revised. When you are ready, please start the test below.

/20

132

Roofing Construction & Estimating, Revised

Want to test your knowledge of the "Roofing Construction & Estimating, Revised" book? This free practice test is all about helping you ace the concepts you learned.

Here's the deal: there are over 50 questions lurking in the system, but you'll get 20 random ones to tackle in just 40 minutes. Don't worry, these questions are designed to mirror the kind of stuff you'll need to know for your Illinois Roofing License (and many other trade licenses too!).

The best part? This practice test is totally free, and you can take it as many times as you want! No two tests will be the same, so it's a great way to keep practicing and building your roofing knowledge.

Ready to give it a shot? Let's get started!

Please enter your following information to get started:

1 / 20

Install an ice shield made of one ply of 50-pound smooth covered roll roofing parallel to the eaves of roofs with slopes ____________.

A) 1 in 12

B) 8 in 12

C) 4 in 12 and steeper

D) 3 in 6

2 / 20

Asphalt shingles sizes range from _________.

A) 42 to 44 inches long, and from 12 to 14 1/8 inches wide

B) 42 to 44 inches long, and from 14 1/8 inches to 16 inches wide

C) 35 5/16 to 42 inches long, and from 14 1/8 to 16 inches wide

D) 35 5/16 to 42 inches long, and from 12 to 14 1/8 inches wide

3 / 20

All laps in mechanically-fastened EPDM systems should be adhered with any of the following EXCEPT:

A) approved lap cement

B) joint tape

C) 1/4-inch-diameter bead of seam caulk

D) gorilla glue

4 / 20

Where the built-up roof intersects vertical surfaces, for the purpose of breaking the sharp angle between the wall and the roof deck, there is to be _____________________.

A) cap strips installed

B) concrete strips installed

C) coping strips installed

D) cant strips installed

5 / 20

How many rakes does a hip roof have?

A) 0

B) 2

C) 1

D) 4

6 / 20

When installing a vent flashing, the asphalt shingle should be installed ________.

A) over the upper end of the flashing

B) under the upper end of the flashing

C) under the lower end of the flashing

D) over the lower end of the flashing

7 / 20

All laps in mechanically-fastened EPDM systems should be adhered with any of the following EXCEPT:

A) approved lap cement

B) joint tape

C) gorilla glue

D) 1/4-inch-diameter bead of seam caulk

8 / 20

For a three-ply BUR system typically consists of a nailed or mopped base sheet with ___ of roofing felts laid like shingles with a 17-inch exposure.

A) two layers

B) three layers

C) one layer

D) four layers

9 / 20

When applying corrugated metal roofing panels, install the first row of panels along the eaves with the ribs parallel to the slope with a ___ overhang at the eaves.

A) 3/8"

B) 6" to 9"

C) 1/4"

D) 1" to 2"

10 / 20

Asphalt shingles sizes range from _________.

A) 35 5/16 to 42 inches long, and from 12 to 14 1/8 inches wide.

B) 42 to 44 inches long, and from 12 to 14 1/8 inches wide.

C) 42 to 44 inches long, and from 14 1/8 inches to 16 inches wide.

D) 35 5/16 to 42 inches long, and from 14 1/8 to 16 inches wide.

11 / 20

When applying corrugated metal roofing panels, install the first row of panels along the eaves with the ribs parallel to the slope with a ___ overhang at the eaves.

A) 1/4"

B) 1" to 2"

C) 3/8"

D) 6" to 9"

12 / 20

Mineral-surfaced roll roofing should be installed when the temperature is _________.

A) between 25 degrees F and 30 degrees F

B) above 45 degrees F

C) between 40 degrees F and 45 degrees F

D) between 30 degrees F and 35 degrees F

13 / 20

Some elastomeric roofing materials will stretch up to ________.

A) 250%

B) 350%

C) 150%

D) 450%

14 / 20

A shingle's exposure is ________________.

A) the part of the shingle not covered by the next course of shingles.

B) the part of the shingle covered by the previous course of shingles.

C) the part of the shingle covered by the next course of shingles.

D) the part of the shingle located above the nailing strip.

15 / 20

When installing a vent flashing, the asphalt shingle should be installed ________.

A) over the lower end of the flashing

B) under the upper end of the flashing

C) under the lower end of the flashing

D) over the upper end of the flashing

16 / 20

The best time to repair asphalt shingles is during _____________________.

A) temperatures from 90 degrees F to 95 degrees F

B) temperatures from 25 degrees F to 32 degrees F

C) cold weather

D) warm weather

17 / 20

For spot repairing minor worn areas on asphalt shingles, this is done by ________________.

A) applying glue and sprinkling with loose granules and rubbing them into the glue

B) applying roofing cement and sprinkling with course pea gravel stones and rubbing them into the cement

C) applying glue and sprinkling with course pea gravel stones and rubbing them into the glue

D) applying roofing cement and sprinkling with loose granules and rubbing them into the cement

18 / 20

Of the following, which is NOT used for the solid sheathing for wood shingles?

A) 2" x 10"

B) 1" x 8"

C) 1" x 10"

D) 1" x 12"

19 / 20

A damaged asphalt shingle can be repaired by _________________.

A) installing non-galvanized sheet metal above the shingle and nailing the metal into a bed of roofing cement

B) installing galvanized sheet metal beneath the shingle and nailing the metal into a bed of roofing cement

C) installing galvanized sheet metal above the shingle and nailing the metal into a bed of roofing cement

D) installing non-galvanized sheet metal beneath the shingle and nailing the metal into a bed of glue

20 / 20

The life expectancy of a BUR is ____________.

A) 15 to 20 years

B) 5 to 10 years

C) 20 years or more

D) 10 to 15 years

Your score is

The average score is 69%

Roofing Construction & Estimating, Revised: Your Comprehensive Guide to Mastering Roof Projects

Last Updated: October 22, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

Roofing Construction & Estimating, Revised: Your Comprehensive Guide to Mastering Roof Projects

The Roofing Construction & Estimating, Revised book by Dan Atcheson serves as a comprehensive manual for professionals and aspiring roofers seeking to expand their knowledge and skills in both the practical aspects of roof construction and the crucial art of accurate roofing estimation.

Focus Areas:

The book delves into two key areas:

Roof Construction: This section provides a step-by-step guide to installing various types of roofing systems on both residential and commercial buildings. It equips readers with the knowledge and techniques required to handle a wide range of roofing materials and applications.
Estimating: Mastering accurate estimation is essential for any roofing contractor. This section provides a roadmap for creating competitive and profitable bids. It covers essential skills like material take-off procedures, cost calculations, and factoring in labor costs.

Content Breakdown:

Here’s a closer look at the specific content covered in the book:

Roofing Fundamentals: This section lays the groundwork by explaining basic roofing terminology, components of a roof system (underlayment, flashing, ventilation), and the different types of roof slopes (e.g., flat, gabled, hip).
Underlayment and Waterproofing: Understanding the crucial role of underlayment and waterproofing materials in preventing leaks and extending roof life is emphasized. The book covers various underlayment options like felt paper, synthetic underlayment, and ice & water shield membranes.
Shingle Roofing: A detailed exploration of shingle roofing, the most common residential roofing type, is provided. This includes installation techniques for asphalt shingles, architectural shingles, and designer shingles.
Metal Roofing: This section covers the growing popularity of metal roofing systems, exploring different types like standing seam, metal panels, and metal shingles. Installation methods and considerations for metal roofs are discussed.
Low-Slope Roofing: Flat and low-slope roofs are common in commercial and industrial buildings. The book dives into various low-slope roofing systems like built-up roofing (BUR), modified bitumen systems, and single-ply membranes.
Roof Coatings: Restoring existing roofs with roof coatings is a cost-effective alternative to replacement. This section explores different types of roof coatings and their application techniques.
Estimating Basics: The book walks you through the estimating process, from understanding project specifications and blueprints to creating a detailed material list (take-off). It covers calculating labor costs, factoring in overhead expenses, and applying profit margins to arrive at a competitive bid price.
Sample Estimates: The book includes valuable examples of different types of roofing project estimates, providing practical guidance and a reference point for creating your own bids.
Job Site Safety: Safety is paramount in the roofing industry. The book emphasizes safe work practices, proper fall protection methods, and the importance of adhering to OSHA regulations.

Benefits for Roofers:

The Roofing Construction & Estimating, Revised book offers a multitude of benefits for both aspiring and experienced roofers:

Comprehensive Knowledge: The book provides a thorough understanding of various roofing systems, materials, and installation techniques.
Estimation Expertise: By mastering the estimating techniques presented, roofers can create accurate and profitable bids, ensuring financial success.
Career Advancement: The knowledge and skills gained through this book can help roofers qualify for higher-level positions and take on more complex roofing projects.
Improved Client Confidence: Demonstrating expertise in both construction and estimation allows roofers to build trust with clients and win more projects.

The Roofing Construction & Estimating, Revised book is a valuable resource for anyone seeking to excel in the roofing industry. By delving into both the practical and financial aspects of roofing, the book empowers readers to confidently handle any roofing project, from construction to estimation and client communication

What states utilize the Roofing Construction & Estimating, Revised Book?

The “Roofing Construction & Estimating, Revised” book isn’t directly used as a licensing exam by any state. However, the knowledge it covers aligns with core concepts tested in many states for roofing contractor licensing.

Here’s why:

Focus of the Book: The book emphasizes both the practical aspects of roof construction (various roofing systems, installation techniques) and the financial side (accurate estimating).
Licensing Exams: Roofing contractor licensing exams typically assess a candidate’s knowledge of these very areas – construction best practices for different roofing materials and applications, and the ability to create accurate and profitable bids.

While the specific content on a state-by-state basis might differ, “Roofing Construction & Estimating, Revised” serves as a valuable study resource because it covers foundational knowledge relevant to most roofing licensing exams.

Here are some tips for finding out which resources are used for your state’s roofing license exam:

Contact your state’s licensing agency: They can provide the most up-to-date information on required exams, reference materials, and testing procedures.
Search online: Look for the official website of your state’s Department of Professional and Occupational Regulation or a similar agency. They often have dedicated sections for licensing information, including required exams and study materials.
Talk to experienced roofers in your area: They might have insights into the specific resources they used to prepare for their exams.

By utilizing these resources and studying the core concepts covered in “Roofing Construction & Estimating, Revised,” you’ll be well on your way to passing your state’s roofing contractor licensing exam.

Why Should I Take CPE’s Roofing Construction & Estimating, Revised Free Test?

Preparing for your roofing license exam can be a daunting task, but CPE’s Roofing Construction & Estimating, Revised Free Test is here to make that process easier. If you’re serious about passing your roofing license exam, taking as many practice tests as possible is one of the best strategies. We’ve been where you are, and we understand that the key to success is consistent practice. Our tests are specifically designed to simulate the actual roofing license exam, giving you the experience you need to feel confident and prepared when you arrive at the testing center.

This free practice test offers you unlimited opportunities to hone your skills. You can take the test as many times as you want, allowing you to gauge your progress over time. We recommend continuing to practice until you score at least 80% three times in a row. This will ensure that you not only understand the material but also retain the knowledge needed to perform well under exam conditions. Since a passing score for the actual roofing license exam is 70%, aiming for higher scores during practice helps you go into the exam day with confidence.

CPE’s Roofing Construction & Estimating, Revised Free Test is an invaluable tool in your roofing license exam preparation. It reinforces critical concepts related to roofing construction, estimating, and project management, all while helping you sharpen your test-taking skills. With this free resource, you’ll be well-equipped to pass your roofing license exam and take the next step toward a successful career in roofing.

Related To Roofing Licensing

Illinois Commercial and Industrial Practice Exam

Illinois Commercial and Industrial Roofing Practice Test(Illinois) You must have the Residential Roofing License to take the examWelcome to the timed practice test for Illinois Commercial and Industrial Roofing. When you are ready, please start...

Illinois Unlimited Roofing License Practice Test

Illinois Unlimited Roofing Practice Test(Illinois) Residential Commercial and Industrial Welcome to the timed practice test to obtain an Illinois Unlimited Roofing License. When you are ready, please start the test below. If you're looking for a...

Illinois Residential Roofing Practice Test

Illinois Residential Roofing Practice Test(Illinois) For roofing work on residential buildings in IllinoisAre you ready to pass your Illinois Residential Roofing License exam on the first try? Our timed Illinois Residential Roofing Practice Test is...

NRCA Roofing Manual Membrane Roof Systems

NRCA Roofing Manual Membrane Roof System(Florida and Illinois) Practice test for your Florida or Illinois Roofing LicenseReady to ace your Florida or Illinois Roofing License Exam? Don't miss this incredible opportunity to sharpen your skills with...

Maryland Home Improvement License Free Test

Maryland Home Improvement Free Test(Maryland) Contractor License Unlock your future in the Maryland home improvement industry by taking our Free MHIC Practice Test—the key to mastering the real exam! Our timed practice test is carefully designed to...

Maryland Home Improvement License Practice Test

Maryland Home Improvement Practice Test(Maryland) Contractor LicenseAre you ready to unlock your future as a licensed Maryland home improvement contractor? 🏠🔨 Imagine walking into your MHIC exam with the confidence of a seasoned pro. That's exactly...

Next Entries »

View All