Roofing Construction & Estimating, Revised Free Test

(Roofing)

Knowledge needed for multiple states for Roofing licenses.

Welcome to the free timed practice test on Roofing Construction & Estimating, Revised. When you are ready, please start the test below.

/20

132

Roofing Construction & Estimating, Revised

Want to test your knowledge of the "Roofing Construction & Estimating, Revised" book? This free practice test is all about helping you ace the concepts you learned.

Here's the deal: there are over 50 questions lurking in the system, but you'll get 20 random ones to tackle in just 40 minutes. Don't worry, these questions are designed to mirror the kind of stuff you'll need to know for your Illinois Roofing License (and many other trade licenses too!).

The best part? This practice test is totally free, and you can take it as many times as you want! No two tests will be the same, so it's a great way to keep practicing and building your roofing knowledge.

Ready to give it a shot? Let's get started!

Please enter your following information to get started:

1 / 20

Fasteners for each wood shingle should be placed ________________.

A) 2 3/4 inches to 3 inches from the shingle's edge

B) 3/4 inch to 1 inch from the shingle's edge

C) 1 3/4 inches to 2 inches from the shingle's edge

D) 1/4 inch to 1/2 inch from the shingle's edge

2 / 20

Which of the following asphalt bitumens is commonly used?

A) Type II

B) Type IV

C) Type III

D) Type I

3 / 20

What type of insulation is required for wood frame floors over a heated basement?

A) 1" thick rigid Styrofoam

B) 1" R-6 Urethane perimeter insulation

C) 1" R-5 Urethane perimeter insulation

D) None.

4 / 20

A BUR's base sheet serves the purpose of all of the following EXCEPT:

A) Fire retarder

B) Protects insulation

C) Protects subsequent membranes from damage due to moisture from within a building

D) Vapor retarder

5 / 20

It is recommended that wood shingles be placed over solid sheathing when ______________.

A) the January mean temperature is 32 degrees or less

B) the outside design temperature is warmer than 32 degrees F

C) there is a possibility that ice will form along the ridge while causing a backup of water

D) the mean temperature in January is 25 degrees F or less

6 / 20

The best time to repair asphalt shingles is during _____________________.

A) temperatures from 90 degrees F to 95 degrees F

B) temperatures from 25 degrees F to 32 degrees F

C) cold weather

D) warm weather

7 / 20

All laps in mechanically-fastened EPDM systems should be adhered with any of the following EXCEPT:

A) approved lap cement

B) joint tape

C) gorilla glue

D) 1/4-inch-diameter bead of seam caulk

8 / 20

What is a hip roof?

A) None of these

B) A type of roof featuring steeply-angled sides that begin at or near the foundation line, and meet at the top

C) A type of roof where all sides slope downwards to the walls typically with a fairly gentle slope

D) A roof type which is almost level

9 / 20

For spot repairing minor worn areas on asphalt shingles, this is done by ________________.

A) applying glue and sprinkling with loose granules and rubbing them into the glue

B) applying roofing cement and sprinkling with loose granules and rubbing them into the cement

C) applying roofing cement and sprinkling with course pea gravel stones and rubbing them into the cement

D) applying glue and sprinkling with course pea gravel stones and rubbing them into the glue

10 / 20

Where the built-up roof intersects vertical surfaces, for the purpose of breaking the sharp angle between the wall and the roof deck, there is to be _____________________.

A) cap strips installed

B) concrete strips installed

C) coping strips installed

D) cant strips installed

11 / 20

A three-tab strip asphalt shingle is typically ________.

A) 2' x 3'

B) 1' x 3'

C) 1' x 1.5'

D) 1' x 2'

12 / 20

Mineral-surfaced roll roofing should be installed when the temperature is _________.

A) between 25 degrees F and 30 degrees F

B) above 45 degrees F

C) between 40 degrees F and 45 degrees F

D) between 30 degrees F and 35 degrees F

13 / 20

How many rakes does a hip roof have?

A) 0

B) 2

C) 1

D) 4

14 / 20

How many bundles are in a square of 18" Perfections Black Label red cedar shingles?

A) 3 bdls

B) 4 bdls

C) 6 bdls

D) 2 bdls

15 / 20

Which type of shingles have a fiberglass base mat that is saturated and covered with flexible asphalt and surfaced with mineral granules?

A) fiberglass

B) wood

C) asphalt

D) plastic

16 / 20

When replacing a broken slate, insert the new slate ________.

A) over the three underlying courses and nail it into place

B) underneath the two overlying courses and nail it into place

C) over the two overlying courses and nail it into place

D) underneath the three overlying courses and nail it into place

17 / 20

When installing asphalt strip shingles using a roll roofing starter course, use a minimum ______ strip of mineral-surfaced roll roofing whose color that matches the shingles.

A) 7" wide

B) 12" wide

C) 5" wide

D) 8" wide

18 / 20

The best time to repair asphalt shingles is during _____________________.

A) temperatures from 90 degrees F to 95 degrees F

B) warm weather

C) cold weather

D) temperatures from 25 degrees F to 32 degrees F

19 / 20

Asphalt shingles sizes range from _________.

A) 35 5/16 to 42 inches long, and from 12 to 14 1/8 inches wide.

B) 42 to 44 inches long, and from 12 to 14 1/8 inches wide.

C) 42 to 44 inches long, and from 14 1/8 inches to 16 inches wide.

D) 35 5/16 to 42 inches long, and from 14 1/8 to 16 inches wide.

20 / 20

A 2,000 square foot roof is ________ square.

A) 20

B) 200

C) 2,000

D) 40

Your score is

The average score is 69%

Roofing Construction & Estimating, Revised: Your Comprehensive Guide to Mastering Roof Projects

Last Updated: October 22, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

Roofing Construction & Estimating, Revised: Your Comprehensive Guide to Mastering Roof Projects

The Roofing Construction & Estimating, Revised book by Dan Atcheson serves as a comprehensive manual for professionals and aspiring roofers seeking to expand their knowledge and skills in both the practical aspects of roof construction and the crucial art of accurate roofing estimation.

Focus Areas:

The book delves into two key areas:

Roof Construction: This section provides a step-by-step guide to installing various types of roofing systems on both residential and commercial buildings. It equips readers with the knowledge and techniques required to handle a wide range of roofing materials and applications.
Estimating: Mastering accurate estimation is essential for any roofing contractor. This section provides a roadmap for creating competitive and profitable bids. It covers essential skills like material take-off procedures, cost calculations, and factoring in labor costs.

Content Breakdown:

Here’s a closer look at the specific content covered in the book:

Roofing Fundamentals: This section lays the groundwork by explaining basic roofing terminology, components of a roof system (underlayment, flashing, ventilation), and the different types of roof slopes (e.g., flat, gabled, hip).
Underlayment and Waterproofing: Understanding the crucial role of underlayment and waterproofing materials in preventing leaks and extending roof life is emphasized. The book covers various underlayment options like felt paper, synthetic underlayment, and ice & water shield membranes.
Shingle Roofing: A detailed exploration of shingle roofing, the most common residential roofing type, is provided. This includes installation techniques for asphalt shingles, architectural shingles, and designer shingles.
Metal Roofing: This section covers the growing popularity of metal roofing systems, exploring different types like standing seam, metal panels, and metal shingles. Installation methods and considerations for metal roofs are discussed.
Low-Slope Roofing: Flat and low-slope roofs are common in commercial and industrial buildings. The book dives into various low-slope roofing systems like built-up roofing (BUR), modified bitumen systems, and single-ply membranes.
Roof Coatings: Restoring existing roofs with roof coatings is a cost-effective alternative to replacement. This section explores different types of roof coatings and their application techniques.
Estimating Basics: The book walks you through the estimating process, from understanding project specifications and blueprints to creating a detailed material list (take-off). It covers calculating labor costs, factoring in overhead expenses, and applying profit margins to arrive at a competitive bid price.
Sample Estimates: The book includes valuable examples of different types of roofing project estimates, providing practical guidance and a reference point for creating your own bids.
Job Site Safety: Safety is paramount in the roofing industry. The book emphasizes safe work practices, proper fall protection methods, and the importance of adhering to OSHA regulations.

Benefits for Roofers:

The Roofing Construction & Estimating, Revised book offers a multitude of benefits for both aspiring and experienced roofers:

Comprehensive Knowledge: The book provides a thorough understanding of various roofing systems, materials, and installation techniques.
Estimation Expertise: By mastering the estimating techniques presented, roofers can create accurate and profitable bids, ensuring financial success.
Career Advancement: The knowledge and skills gained through this book can help roofers qualify for higher-level positions and take on more complex roofing projects.
Improved Client Confidence: Demonstrating expertise in both construction and estimation allows roofers to build trust with clients and win more projects.

The Roofing Construction & Estimating, Revised book is a valuable resource for anyone seeking to excel in the roofing industry. By delving into both the practical and financial aspects of roofing, the book empowers readers to confidently handle any roofing project, from construction to estimation and client communication

What states utilize the Roofing Construction & Estimating, Revised Book?

The “Roofing Construction & Estimating, Revised” book isn’t directly used as a licensing exam by any state. However, the knowledge it covers aligns with core concepts tested in many states for roofing contractor licensing.

Here’s why:

Focus of the Book: The book emphasizes both the practical aspects of roof construction (various roofing systems, installation techniques) and the financial side (accurate estimating).
Licensing Exams: Roofing contractor licensing exams typically assess a candidate’s knowledge of these very areas – construction best practices for different roofing materials and applications, and the ability to create accurate and profitable bids.

While the specific content on a state-by-state basis might differ, “Roofing Construction & Estimating, Revised” serves as a valuable study resource because it covers foundational knowledge relevant to most roofing licensing exams.

Here are some tips for finding out which resources are used for your state’s roofing license exam:

Contact your state’s licensing agency: They can provide the most up-to-date information on required exams, reference materials, and testing procedures.
Search online: Look for the official website of your state’s Department of Professional and Occupational Regulation or a similar agency. They often have dedicated sections for licensing information, including required exams and study materials.
Talk to experienced roofers in your area: They might have insights into the specific resources they used to prepare for their exams.

By utilizing these resources and studying the core concepts covered in “Roofing Construction & Estimating, Revised,” you’ll be well on your way to passing your state’s roofing contractor licensing exam.

Why Should I Take CPE’s Roofing Construction & Estimating, Revised Free Test?

Preparing for your roofing license exam can be a daunting task, but CPE’s Roofing Construction & Estimating, Revised Free Test is here to make that process easier. If you’re serious about passing your roofing license exam, taking as many practice tests as possible is one of the best strategies. We’ve been where you are, and we understand that the key to success is consistent practice. Our tests are specifically designed to simulate the actual roofing license exam, giving you the experience you need to feel confident and prepared when you arrive at the testing center.

This free practice test offers you unlimited opportunities to hone your skills. You can take the test as many times as you want, allowing you to gauge your progress over time. We recommend continuing to practice until you score at least 80% three times in a row. This will ensure that you not only understand the material but also retain the knowledge needed to perform well under exam conditions. Since a passing score for the actual roofing license exam is 70%, aiming for higher scores during practice helps you go into the exam day with confidence.

CPE’s Roofing Construction & Estimating, Revised Free Test is an invaluable tool in your roofing license exam preparation. It reinforces critical concepts related to roofing construction, estimating, and project management, all while helping you sharpen your test-taking skills. With this free resource, you’ll be well-equipped to pass your roofing license exam and take the next step toward a successful career in roofing.