California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Are you ready to ace your California Health and Safety exam and get one step closer to earning your CSLB license? Our timed California Health and Safety Free Practice Test is designed to give you the edge you need to pass the real exam with confidence. These practice tests are crafted from the very same materials we used to gain certifications in states like Illinois, Colorado, Florida, and Montana, so you can trust they’ll prepare you for success.

By simulating the real test environment with timed questions and expertly curated content, you’ll sharpen your knowledge and time management skills, ensuring you’re fully prepared when exam day comes. Don’t leave your future to chance—take our free practice test now and be on your way to a successful career with your California CSLB license!

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

/30

California Health and Safety Free Test

Want to test your knowledge of the "California Health and Safety" exam? This free practice test is all about helping you ace the concepts you need to pass for your Contractor's License.

Here's the deal: there are over 200 questions lurking in the system, but you'll get 30 random ones to tackle in just 90 minutes. Don't worry, these questions are designed to mirror the kind of stuff you'll need to know.

The best part? This practice test is totally free, and you can take it as many times as you want! No two tests will be the same, so it's a great way to keep practicing and building your knowledge.

Ready to give it a shot? Let's get started!

Please enter your following information to get started:

1 / 30

A stairway, ladder, ramp or other safe means of egress shall be located in trench excavations that are _____ feet or more in depth so as to require no more than _____ feet of lateral travel by employees.

A) 4 … 25

B) 6 … 30

C) 7 … 35

D) 8 … 40

2 / 30

Explosives must be kept clear of electrical circuits by at least:

A) 15 feet

B) 25 feet

C) 50 feet

D) 100 feet

3 / 30

What should you use to wash off a toxic chemical burn?

A) water

B) milk

C) soda

D) rubbing alcohol

4 / 30

A contractor who engages in asbestos abatement work in a facility (such as a school) and violates the national emissions standards for hazardous air pollutants (NESHAP) is subject to_____ .

A) fines and penalties of $25,000 per day

B) penalties leading to criminal charges and/ or imprisonment.

C) Both A and B

D) Neither A nor B

5 / 30

In general, what is the maximum safe depth that you may cut a trench without shoring?

A) 3 ft

B) 5 ft

C) 7 ft

D) 15 ft

6 / 30

When is foot protection required?

A) when you must walk over 800 feet

B) when you are walking on rock

C) when you are walking on a metal roof

D) when there is a danger of objects falling on your feet

7 / 30

Compressor safety valves must be popped at least:

A) hourly

B) daily

C) weekly

D) monthly

8 / 30

The operator should inspect an industrial truck, forklift, and industrial tow tractor at least:

A) at the start of the shift

B) once a day

C) once a week

D) . every two weeks

9 / 30

Safety meetings are required to be held every __________ at the job site.

A) 5 days

B) 10 days

C) month

D) year

10 / 30

When piling bags of cement more than _____ high, the face of the pile must be tapered back.

A) 4 feet

B) 5 feet

C) 6 feet

D) 9 feet

11 / 30

In a work place, travel distance to a fire extinguisher must not be more than:

A) 25 ft

B) 50 ft

C) 75 ft

D) 100 ft

12 / 30

How often should the boom-angle indicator on a crane be inspected by the operator?

A) every day

B) every week

C) every month

D) every year

13 / 30

According to the labor code, beginning asbestos-related work without first determining if asbestos containing material is present could lead to a fine of_____ .

A) $5,000 and/or 6 months jail time for negligence

B) $10,000 and/or 1 year jail time.

C) A civil penalty of no more than $2,000 for each violation

D) Any of the above

14 / 30

What color tag does Cal/OSHA place on a piece of equipment that is unsafe and needs repair?

A) red

B) orange

C) blue

D) purple

15 / 30

Lumber piles that are to be handled manually may not be stacked higher than:

A) 8 feet

B) 10 feet

C) 16 feet

D) 20 feet

16 / 30

During removal, asbestos must be wetted down to keep airborne fibers under control, after removal asbestos must_____ .

A) be placed in leak-tight containers with labels

B) be kept wet

C) be transported to a state approved waste disposal

D) All of the above

17 / 30

It is unsafe to use a step ladder taller than:

A) 10 feet

B) 15 feet

C) 120 feet

D) 25 feet

18 / 30

If a contractor engages in asbestos abatement work of 100 sq. ft. or more without certification and registration, the contractor is subject to a fine of_____ .

A) not less than $2,000 dollar

B) not less than $5,000 dollars

C) not less than $10,000 dollars

D) not less than $25,000

19 / 30

The valve on a gas cylinder should be opened slowly to prevent damage to the:

A) operator

B) tank wall

C) valve cap

D) regulator

20 / 30

How many workers are allowed on a suspended scaffold at any one time?

A) 1

B) 2

C) 3

D) 4

21 / 30

Ladder rungs must be spaced ____ apart and be ____ long.

A) 11 inches … 11 inches

B) 11-1/2 inches … 11-1/2 inches

C) 12 inches … 11-1/2 inches

D) 12 inches … 12 inches

22 / 30

A harmful, irritating, or nuisance material that is foreign to an environment is generally known as a(n):

A) alien

B) interloper

C) contaminant

D) toxin

23 / 30

The minimum clearance required from overhead high-voltage (600V to 50,000V) conductors for boom-type lifting or hoisting equipment while being operated is:

A) 4 ft

B) 6 ft

C) 7-1/2 ft

D) 10ft

24 / 30

Every crane, derrick, or cableway exceeding 3 tons capacity must be certified every _____ by a qualified person.

A) day

B) 3 months

C) six months

D) year

25 / 30

The maximum length of a TWO-SECTION METAL EXTENSION ladder is:

A) 38 feet

B) 48 feet

C) 58 feet

D) 68 feet

26 / 30

Where the voltage is limited to 300 volts to ground, service drops over residential property and driveways must have a minimum clearance of:

A) 10 ft

B) 12 ft

C) 15 ft

D) 18 ft

27 / 30

Cranes with a boom longer than 60 feet or with a rating greater than _____ require a boomangle indicator.

A) 5 tons

B) 10 tons

C) 15 tons

D) 20 tons

28 / 30

Which of the following fire extinguishers is allowed in California?

A) carbon tetrachloride

B) chlorobromomethane

C) methyl bromide

D) all are prohibited due to toxicity

29 / 30

“Tailgate” safety regulations require:

A) a safety check every 10 days

B) a meeting with the foremen every 30 days

C) posting of safety rules

D) all of the above

30 / 30

In general, what kind of extension cord should you use?

A) two-wire

B) any standard commercial cord such as one carried in hardware stores

C) three-prong wire

D) multiconductor “S” type cord or equivalent

Your score is

The average score is 22%

How much of the California Trade exams focus on Health and Safety?

Last Updated: October 22, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

The percentage focus on health and safety in CSLB exams varies depending on the specific license you’re pursuing. However, it’s generally considered a significant and essential part of most CSLB exams. Here’s a breakdown:

High Focus (20-40%):

Moderate Focus (10-20%):

Lower Focus (Minimal):

Here are some resources to learn more about the health and safety focus of specific CSLB exams:

CSLB Website: The CSLB website provides “Examination Study Guides” for each license. These guides outline the topics covered in the exam, and many will explicitly mention health and safety topics that will be tested. https://www.cslb.ca.gov/contractors/applicants/examination_study_guides/

CSLB Exam Content Outlines: The CSLB may also offer “Content Outlines” for some exams, which detail the exam format and weighting of different topics. These can help you gauge the importance placed on health and safety within the exam.

By reviewing the resources above for your target CSLB license, you can get a clearer picture of the specific health and safety knowledge and practices expected from a licensed contractor in that field.

What are some Health and Safety questions that might be on the test?

The specific health and safety questions on a CSLB exam will depend on the type of license you’re pursuing. However, here are some general examples of health and safety questions you might encounter on various CSLB exams:

Electrical Safety (C-46 Solar Contractor License, C-10 Electrical Contractor License):

What are the National Electrical Code (NEC) requirements for grounding solar photovoltaic (PV) systems?

How do you identify and avoid electrical hazards during solar panel installation?

What personal protective equipment (PPE) is required when working on electrical components?

What are the proper procedures for de-energizing and lockout/tagout of electrical equipment before working on it?

Fall Protection:

What fall protection systems are required when working at heights (above 6 feet)?

How do you inspect and maintain fall protection equipment like harnesses and lifelines?

What are the safe ladder usage practices to prevent falls?

Trench Safety:

What are the OSHA trench safety standards for depth, sloping, and shoring requirements?

How do you identify and avoid potential trench collapses?

What rescue procedures should be followed in case of a trench collapse?

Hazardous Materials:

How do you identify and safely handle asbestos-containing materials (ACMs) (if applicable to your license)?

What are the proper procedures for lead paint removal or abatement (if applicable)?

What personal protective equipment is required when working with hazardous materials?

General Construction Safety:

What are the fire safety protocols for construction sites?

How do you prevent and control dust exposure on a construction site?

What are the safe lifting techniques to avoid back injuries?

How do you recognize and report unsafe work conditions on a construction site?

These are just a few examples, and the actual questions will vary in wording and complexity depending on the exam.

Here are some additional tips for preparing for the health and safety portion of your CSLB exam:

Review the CSLB Examination Study Guide: As mentioned earlier, the CSLB provides study guides that outline the topics covered in each exam. Pay close attention to the health and safety sections.

Focus on Code Requirements: Many health and safety regulations are established by national codes like the National Electrical Code (NEC) or OSHA standards. Understanding these codes will be crucial for answering exam questions.

Practice with Sample Questions: There are various resources online and in textbooks that offer sample CSLB exam questions, including those focused on health and safety including CPE’s practice test above.

By studying the relevant material and understanding the importance of health and safety practices, you can increase your chances of success on the health and safety portion of your CSLB exam.

Why do i need to know Cal/OSHA material to get my CSLB License?

Understanding Cal/OSHA (California Occupational Safety and Health Administration) material is essential for obtaining your CSLB (Contractors State License Board) license because Cal/OSHA sets the safety standards and regulations that contractors must follow to ensure safe working conditions on job sites. Here’s why it’s important:

Legal Compliance: As a licensed contractor in California, you’re responsible for complying with all safety regulations on your job sites. Cal/OSHA sets the laws that govern workplace safety, and contractors must understand and adhere to these rules to avoid fines, penalties, or legal action.
Worker Safety: Cal/OSHA regulations help protect your workers from accidents and injuries. Knowing the material ensures you can implement the right safety measures, provide adequate training, and create a safer work environment, which is crucial for reducing risks and liabilities.
Client Confidence: Clients expect contractors to follow the highest safety standards. Demonstrating knowledge of Cal/OSHA regulations enhances your credibility and assures clients that their projects will be handled safely and professionally.
Pass the CSLB Exam: The CSLB exam includes questions related to health and safety, including Cal/OSHA standards. Having a thorough understanding of these regulations is critical to passing the exam and getting your license.
Project Efficiency: Understanding safety standards helps prevent costly delays due to accidents, site inspections, or compliance issues. Safe work environments lead to smoother, more efficient operations.

Ultimately, knowing Cal/OSHA material is about ensuring safety, legal compliance, and professionalism—key elements of being a successful and responsible contractor in California.

Why should I take CPE’s California Health and Safety Free Practice Exam for my CSLB License?

If you’re preparing for your CSLB license, taking CPE’s California health and safety practice test is one of the best ways to ensure you’re ready for the actual exam. We’ve been in your shoes, and we know firsthand that the key to passing is to practice as much as possible. Our California safety exam free prep is designed to simulate the real test you’ll encounter at the official testing center, helping you familiarize yourself with the format, timing, and types of questions you’ll face.

The best part? Our practice tests are completely free, and you can take them as many times as you need. We recommend practicing until you achieve at least an 80% score three times in a row, giving you the confidence you need to pass the real exam, where a 70% is considered a passing grade. By taking the time to repeatedly practice, you’ll develop the knowledge and test-taking skills needed to tackle the health and safety sections of the exam without anxiety.

CPE’s free practice exam allows you to measure your strengths and identify areas that need improvement, offering a targeted way to study and boost your chances of success. Don’t wait—take advantage of our free prep resources today, and get one step closer to earning your CSLB license!

California Health and Safety Free Practice Test Practice Exam

Preparing for your CSLB license can feel overwhelming, but taking our California health and safety practice test can make all the difference. With unlimited attempts at a free California safety test online, you’ll get access to 30 randomized questions from a pool of over 200, designed to simulate the real exam format. You’ll have 90 minutes to complete each test, just like in the actual exam. This isn’t just practice—it’s preparation tailored to help you succeed.

We know exactly what you’re going through because we’ve been in your shoes. We’ve earned licenses across multiple states and certifications in areas like roofing, OSHA compliance, and water remediation. Our journey taught us how crucial it is to be fully prepared for the actual test, which is why we’ve collaborated with field experts to develop practice exams that mirror the real thing. These tests are designed to boost your confidence, calm your nerves, and ensure you’re well-prepared when exam day arrives.

So, don’t leave your success to chance. Whether you’re taking the test for the first time or looking to improve your score, our free practice exams are a game-changer. Each attempt helps you familiarize yourself with the exam structure, time constraints, and types of questions you’ll encounter, giving you a significant edge.

Your CSLB license is within reach—start practicing today and get ready to ace the big one!

Related To California Trade Licensing

California Law and Business Practice Test

View All