California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Are you ready to ace your California Health and Safety exam and get one step closer to earning your CSLB license? Our timed California Health and Safety Free Practice Test is designed to give you the edge you need to pass the real exam with confidence. These practice tests are crafted from the very same materials we used to gain certifications in states like Illinois, Colorado, Florida, and Montana, so you can trust they’ll prepare you for success.

By simulating the real test environment with timed questions and expertly curated content, you’ll sharpen your knowledge and time management skills, ensuring you’re fully prepared when exam day comes. Don’t leave your future to chance—take our free practice test now and be on your way to a successful career with your California CSLB license!

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

/30

California Health and Safety Free Test

Want to test your knowledge of the "California Health and Safety" exam? This free practice test is all about helping you ace the concepts you need to pass for your Contractor's License.

Here's the deal: there are over 200 questions lurking in the system, but you'll get 30 random ones to tackle in just 90 minutes. Don't worry, these questions are designed to mirror the kind of stuff you'll need to know.

The best part? This practice test is totally free, and you can take it as many times as you want! No two tests will be the same, so it's a great way to keep practicing and building your knowledge.

Ready to give it a shot? Let's get started!

Please enter your following information to get started:

1 / 30

An employer must test the air at a work place for asbestos concentration if it exceeds__ cc air over an 8-hour period.

A) 0.1

B) 1.0

C) 1.5

D) 2.0

2 / 30

If cables, safety belts, or nets are not provided, a guardrail must be provided for workers on open sides or ends of work areas elevated ______ or higher.

A) 5 feet

B) 6 feet

C) 7 feet

D) 7-1/2 feet

3 / 30

Personal protective equipment required by the Construction Safety Orders must be marked to facilitate identification of the:

A) employer

B) employee

C) date of origin

D) manufacturer

4 / 30

What must be done with ladders that have broken or missing rungs or steps?

A) red tagged for warning

B) repaired immediately

C) immediately withdrawn from service

D) inspected for further use

5 / 30

Prolonged or even high short-term exposure to crystalline silica can result in:

A) silicosis, lung cancer, and COPD

B) decreased lung function, immune system disorders, and kidney deficits

C) increased chance of developing tuberculosis

D) all of the above

6 / 30

Where the voltage is limited to 300 volts to ground, service drops over residential property and driveways must have a minimum clearance of:

A) 10 ft

B) 12 ft

C) 15 ft

D) 18 ft

7 / 30

When using a cut-off saw to cut steel beams, which of the following should be worn?

A) gloves and a face shield

B) a face shield and a leather apron

C) gloves and a welding helmet

D) a leather apron and gloves

8 / 30

According to the Construction Safety Orders, a CONSTRUCTION passenger elevator for hoisting workers must be installed in any building or structure designed to be _____ feet or more in height above or _____feet in depth below ground level when it is completed.

A) 40 … 40

B) 50 … 36

C) 50 … 50

D) 60 … 48

9 / 30

Where ladders are allowed as a primary access or exit from a working area for _____ or more employees, or simultaneous two-way traffic is expected, double cleat ladders must be installed.

A) 10

B) 20

C) 25

D) 50

10 / 30

Mobile cranes with booms over 200 feet or with a capacity greater than______ require a load- indicating device.

A) 10 tons

B) 25 tons

C) 40 tons

D) 50 tons

11 / 30

Single-cleat ladders must be _____ wide.

A) 12 inches to 16 inches

B) 14 inches to 24 inches

C) 15 inches to 20 inches

D) 16 inches to 24 inches

12 / 30

If a worker can fall 7-1/2 feet or more, Cal/OSHA requires:

A) railings

B) periphery cables

C) safety belts or nets

D) any of the above

13 / 30

A fire extinguisher rated at least 2A must be provided for each _____ square feet of the floor area, or fraction therof.

A) 1,000

B) 2,000

C) 3,000

D) 4,000

14 / 30

What is the proper way to test an electrical circuit?

A) 1) test the live side with a voltage tester set on a higher range, (2) test the dead side

B) (1) test the live side with a voltage tester set on a higher range, (2) test the dead side; (3) retest the live side again

C) (1) test the dead side with a voltage tester set on a higher range, (2) test the live side

D) (1) test the dead side with a voltage tester set on a lower range, (2) test the live side with a voltage tester set on a higher range

15 / 30

Burns are classified as which of the following degrees?

A) light, moderate or serious

B) first, second or third degree

C) 1 through 10

D) fourth, fifth or sixth

16 / 30

A roofing jobsite should have fire extinguishers placed:

A) one on the roof and one on the ground

B) one in the building and one on the grounds

C) both on the ground

D) both on the roof

17 / 30

which of the following will require a skirted plug?

A) 110-volt spray gun

B) 220-volt drill

C) 440-volt welding machine

D) any service in a wet environment

18 / 30

In temporary or emergency conditions where there is danger of employees or materials falling through floor, roof, or wall openings, or from stairways or runways, you must:

A) guard floor, roof, and skylight openings by either temporary railings and toeboards or by covers

B) post warning signs

C) rope off the area

D) shut down the job and call DOSH

19 / 30

Which of the following tools require a constant-contact on/off switch?

A) circular saws

B) powered tampers

C) rock drills

D) all of the above

20 / 30

If a contractor engages in asbestos abatement work of 100 sq. ft. or more without certification and registration, the contractor is subject to a fine of_____ .

A) not less than $2,000 dollar

B) not less than $5,000 dollars

C) not less than $10,000 dollars

D) not less than $25,000

21 / 30

If respirators are worn while working with acids they must have the_____ joint seal of approval.

A) mine safety

B) health administration

C) NIOSH

D) All of the above

22 / 30

When is special certification for asbestos related work required?

A) For any asbestos related work involving 50 square feet or more of contaminated material.

B) For any asbestos related work involving 100 square feet or more of contaminated material

C) For any asbestos related work involving 150 square feet or more of contaminated material

D) For any asbestos related work involving 200 square feet or more of contaminated material.

23 / 30

The safe-distance requirement from overhead electrical lines energized between 600V and 50,000V is______ for boom-type lifting and hoisting equipment when not in use.

A) 4 ft

B) 6 ft

C) 7-1/2 ft

D) 10 ft

24 / 30

Lumber piles that are to be handled manually may not be stacked higher than:

A) 8 feet

B) 10 feet

C) 16 feet

D) 20 feet

25 / 30

Why is an LPG leak dangerous?

A) because it is odorless

B) because it is colorless

C) because it is tasteless

D) All of the above

26 / 30

According to_____ the contractor must ask the owner whether asbestos is present in the building before work begins on a job.

A) AB 1060

B) AB 2040

C) CSLB

D) DOSH

27 / 30

What color shirt must a street or highway worker wear?

A) orange

B) white

C) red

D) black

28 / 30

Stacks of loose brick may not be piled higher than:

A) 5 feet

B) 6 feet

C) 7 feet

D) the height of the tallest worker

29 / 30

Daily inspections of excavations, the adjacent areas, and protective systems must be made:

A) to discover signs of a potential cave-in

B) to check for hazardous atmospheres

C) to check on a potential failure of protective systems

D) all of the above

30 / 30

Every crane, derrick, or cableway exceeding 3 tons capacity must be certified every _____ by a qualified person.

A) day

B) 3 months

C) six months

D) year

Your score is

The average score is 22%

How much of the California Trade exams focus on Health and Safety?

Last Updated: October 22, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

The percentage focus on health and safety in CSLB exams varies depending on the specific license you’re pursuing. However, it’s generally considered a significant and essential part of most CSLB exams. Here’s a breakdown:

High Focus (20-40%):

Moderate Focus (10-20%):

Lower Focus (Minimal):

Here are some resources to learn more about the health and safety focus of specific CSLB exams:

CSLB Website: The CSLB website provides “Examination Study Guides” for each license. These guides outline the topics covered in the exam, and many will explicitly mention health and safety topics that will be tested. https://www.cslb.ca.gov/contractors/applicants/examination_study_guides/

CSLB Exam Content Outlines: The CSLB may also offer “Content Outlines” for some exams, which detail the exam format and weighting of different topics. These can help you gauge the importance placed on health and safety within the exam.

By reviewing the resources above for your target CSLB license, you can get a clearer picture of the specific health and safety knowledge and practices expected from a licensed contractor in that field.

What are some Health and Safety questions that might be on the test?

The specific health and safety questions on a CSLB exam will depend on the type of license you’re pursuing. However, here are some general examples of health and safety questions you might encounter on various CSLB exams:

Electrical Safety (C-46 Solar Contractor License, C-10 Electrical Contractor License):

What are the National Electrical Code (NEC) requirements for grounding solar photovoltaic (PV) systems?

How do you identify and avoid electrical hazards during solar panel installation?

What personal protective equipment (PPE) is required when working on electrical components?

What are the proper procedures for de-energizing and lockout/tagout of electrical equipment before working on it?

Fall Protection:

What fall protection systems are required when working at heights (above 6 feet)?

How do you inspect and maintain fall protection equipment like harnesses and lifelines?

What are the safe ladder usage practices to prevent falls?

Trench Safety:

What are the OSHA trench safety standards for depth, sloping, and shoring requirements?

How do you identify and avoid potential trench collapses?

What rescue procedures should be followed in case of a trench collapse?

Hazardous Materials:

How do you identify and safely handle asbestos-containing materials (ACMs) (if applicable to your license)?

What are the proper procedures for lead paint removal or abatement (if applicable)?

What personal protective equipment is required when working with hazardous materials?

General Construction Safety:

What are the fire safety protocols for construction sites?

How do you prevent and control dust exposure on a construction site?

What are the safe lifting techniques to avoid back injuries?

How do you recognize and report unsafe work conditions on a construction site?

These are just a few examples, and the actual questions will vary in wording and complexity depending on the exam.

Here are some additional tips for preparing for the health and safety portion of your CSLB exam:

Review the CSLB Examination Study Guide: As mentioned earlier, the CSLB provides study guides that outline the topics covered in each exam. Pay close attention to the health and safety sections.

Focus on Code Requirements: Many health and safety regulations are established by national codes like the National Electrical Code (NEC) or OSHA standards. Understanding these codes will be crucial for answering exam questions.

Practice with Sample Questions: There are various resources online and in textbooks that offer sample CSLB exam questions, including those focused on health and safety including CPE’s practice test above.

By studying the relevant material and understanding the importance of health and safety practices, you can increase your chances of success on the health and safety portion of your CSLB exam.

Why do i need to know Cal/OSHA material to get my CSLB License?

Understanding Cal/OSHA (California Occupational Safety and Health Administration) material is essential for obtaining your CSLB (Contractors State License Board) license because Cal/OSHA sets the safety standards and regulations that contractors must follow to ensure safe working conditions on job sites. Here’s why it’s important:

Legal Compliance: As a licensed contractor in California, you’re responsible for complying with all safety regulations on your job sites. Cal/OSHA sets the laws that govern workplace safety, and contractors must understand and adhere to these rules to avoid fines, penalties, or legal action.
Worker Safety: Cal/OSHA regulations help protect your workers from accidents and injuries. Knowing the material ensures you can implement the right safety measures, provide adequate training, and create a safer work environment, which is crucial for reducing risks and liabilities.
Client Confidence: Clients expect contractors to follow the highest safety standards. Demonstrating knowledge of Cal/OSHA regulations enhances your credibility and assures clients that their projects will be handled safely and professionally.
Pass the CSLB Exam: The CSLB exam includes questions related to health and safety, including Cal/OSHA standards. Having a thorough understanding of these regulations is critical to passing the exam and getting your license.
Project Efficiency: Understanding safety standards helps prevent costly delays due to accidents, site inspections, or compliance issues. Safe work environments lead to smoother, more efficient operations.

Ultimately, knowing Cal/OSHA material is about ensuring safety, legal compliance, and professionalism—key elements of being a successful and responsible contractor in California.

Why should I take CPE’s California Health and Safety Free Practice Exam for my CSLB License?

If you’re preparing for your CSLB license, taking CPE’s California health and safety practice test is one of the best ways to ensure you’re ready for the actual exam. We’ve been in your shoes, and we know firsthand that the key to passing is to practice as much as possible. Our California safety exam free prep is designed to simulate the real test you’ll encounter at the official testing center, helping you familiarize yourself with the format, timing, and types of questions you’ll face.

The best part? Our practice tests are completely free, and you can take them as many times as you need. We recommend practicing until you achieve at least an 80% score three times in a row, giving you the confidence you need to pass the real exam, where a 70% is considered a passing grade. By taking the time to repeatedly practice, you’ll develop the knowledge and test-taking skills needed to tackle the health and safety sections of the exam without anxiety.

CPE’s free practice exam allows you to measure your strengths and identify areas that need improvement, offering a targeted way to study and boost your chances of success. Don’t wait—take advantage of our free prep resources today, and get one step closer to earning your CSLB license!

California Health and Safety Free Practice Test Practice Exam

Preparing for your CSLB license can feel overwhelming, but taking our California health and safety practice test can make all the difference. With unlimited attempts at a free California safety test online, you’ll get access to 30 randomized questions from a pool of over 200, designed to simulate the real exam format. You’ll have 90 minutes to complete each test, just like in the actual exam. This isn’t just practice—it’s preparation tailored to help you succeed.

We know exactly what you’re going through because we’ve been in your shoes. We’ve earned licenses across multiple states and certifications in areas like roofing, OSHA compliance, and water remediation. Our journey taught us how crucial it is to be fully prepared for the actual test, which is why we’ve collaborated with field experts to develop practice exams that mirror the real thing. These tests are designed to boost your confidence, calm your nerves, and ensure you’re well-prepared when exam day arrives.

So, don’t leave your success to chance. Whether you’re taking the test for the first time or looking to improve your score, our free practice exams are a game-changer. Each attempt helps you familiarize yourself with the exam structure, time constraints, and types of questions you’ll encounter, giving you a significant edge.

Your CSLB license is within reach—start practicing today and get ready to ace the big one!

Related To California Trade Licensing

What is a California C46 license?

What is the California C46 LicenseWhat is the California C46 License Exam?The California C46 exam is a test you need to pass in order to get a Solar Contractor License (C-46) issued by the Contractors State License Board (CSLB) of California. The...

Cal OSHA Free Test

Cal / OSHA Free Practice Test (All trades) Knowledge needed for multiple licenses. Welcome to the free timed practice test on Cal / OSHA. When you are ready, please start the test below.What is...

Blueprint Reading Free Exam

Blueprint Reading Free Exam(California) Essential Knowledge for many California Trade LicensesWelcome to the timed free practice test on Blueprint Reading. When you are ready, please start the test below. If you are interested in more free tests,...

California C46 Solar Practice Exam

California C46 Solar Practice Exam(California) C46 Solar PracticeLooking to pass your California C46 Solar Exam? Here at Contractor Practice Exam, we don’t make you buy books or courses for hundreds or thousands of dollars. We focus on...

Ace Your License Exam

Conquering Your License ExamAce Your License Exam: A Step-by-Step Study GuideHey there, future license holder! We know you're serious about getting that license, and we want to help you succeed. Whether your exam is open book or closed book, the...

California Law and Business Free Exam

California Law and Business Free Exam(California) Law and Business Free Practice TestWelcome to the timed free practice test on California Law and Business. When you are ready, please start the test below. If you want to try our simulated exam on...

California C39 Roofing Free Practice Test

California Roofing C39 Free Practice Test(California) C39 Roofing Free Practice Test.Welcome to the timed free practice test on California C39 Roofing. When you are ready, please start the test below. If you want to try our simulated exam on...

California C39 Roofing License

California C39 Roofing LicenseInformation about obtaining your California C39 Roofing LicenseBefore engaging in any bidding or work, Roofers in California must acquire a license. What is the California C39 License? The California C39 License is for...

California C39 Roofing Practice Test

California Roofing C39 Practice Test(California) C39 Roofing Practice Test.Are you ready to take the next step toward becoming a licensed roofing contractor in California? Our timed California Roofing C39 Practice Test is designed to help you...

« Older Entries

Next Entries »

View All

Submit a Review



Contractor Practice Exam



California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

Report a question

How much of the California Trade exams focus on Health and Safety?

What are some Health and Safety questions that might be on the test?

Why do i need to know Cal/OSHA material to get my CSLB License?

Why should I take CPE’s California Health and Safety Free Practice Exam for my CSLB License?

California Health and Safety Free Practice Test Practice Exam

Related To California Trade Licensing

Submit a Review

Contractor Practice Exam

admin@contractorpracticeexam.com