California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

/30

California Health and Safety Free Test

Want to test your knowledge of the "California Health and Safety" exam? This free practice test is all about helping you ace the concepts you need to pass for your Contractor's License.

Here's the deal: there are over 200 questions lurking in the system, but you'll get 30 random ones to tackle in just 90 minutes. Don't worry, these questions are designed to mirror the kind of stuff you'll need to know.

The best part? This practice test is totally free, and you can take it as many times as you want! No two tests will be the same, so it's a great way to keep practicing and building your knowledge.

Ready to give it a shot? Let's get started!

Please enter your following information to get started:

1 / 30

If a co-worker falls down and suffers a deep, bleeding gash to the head, you should:

A) apply direct pressure to the wound

B) apply a tourniquet

C) find and depress the main supply artery

D) administer CPR

2 / 30

A permit from DOSH is required for erection of scaffolds higher than:

A) 12 ft

B) 24 ft

C) 36 ft

D) 48 ft

3 / 30

Explosives must be kept clear of electrical circuits by at least:

A) 15 ft

B) 25 ft

C) 50 ft

D) 100 ft

4 / 30

On a job you notice that a journey-level electrician, while using a meter on an energized circuit, is using insulated tools and mat, wearing suitable gloves, and is observing other safety practices. The electrician also keeps one hand in a pocket. Why is he or she doing this?

A) relaxation

B) to avoid accidentally knocking the meter clips out of place

C) to avoid moving equipment parts

D) to lessen the chance of a circuit being completed across the chest and through the heart

5 / 30

It is unsafe to use a step ladder taller than:

A) 10 ft

B) 15 ft

C) 20 ft

D) 25 ft

6 / 30

In the interest of safety, what should be done when there is a break or change of elevation of 18inches or more in a hallway floor?

A) Postpone work until the permanent stairway is completed

B) Post a warning sign at least 8 inches × 10 inches in size

C) . Provide a ladder, ramp, or temporary stairs

D) Provide cautionary tape barriers

7 / 30

Supporting ropes for float scaffolds must be _____ or its equivalent.

A) 1/2-inch diameter Manila rope

B) 3/4-inch diameter Manila rope

C) 1-inch diameter Manila rope

D) steel cable

8 / 30

Which of the following fire extinguishers is allowed in California?

A) carbon tetrachloride

B) chlorobromomethane

C) methyl bromide

D) all are prohibited due to toxicity

9 / 30

Medical and monitoring records regarding asbestos exposure at a work place must be kept for at least _____ years.

A) 3

B) 5

C) 7

D) 30

10 / 30

Which of the following organization does a contractor have to notify if performing a demolition job on a commercial building?

A) The Department of Occupational Safety and Health

B) The Federal Environmental Protection Agency

C) The Contractors State License Board

D) The Department of ConsumerAffairs

11 / 30

Ladder rungs must be spaced ____ apart and be ____ long.

A) 11 inches … 11 inches

B) 11-1/2 inches … 11-1/2 inches

C) 12 inches … 11-1/2 inches

D) 12 inches … 12 inches

12 / 30

Which of the following is a correct method for storing acetylene cylinders?

A) valve protection caps are in place

B) stored in an upright position in a well-ventilated and dry location

C) located away from elevators or stairs

D) all of the above

13 / 30

Asbestos can be harmful when it is_____ .

A) wet

B) dry

C) friable

D) All of the above

14 / 30

Safety meetings are required to be held every __________ at the job site.

A) 5 days

B) 10 days

C) month

D) year

15 / 30

Which of the following tools require a constant-contact on/off switch?

A) circular saws

B) powered tampers

C) rock drills

D) all of the above

16 / 30

According to_____ the contractor must ask the owner whether asbestos is present in the building before work begins on a job.

A) AB 1060

B) AB 2040

C) CSLB

D) DOSH

17 / 30

Every truck with a body capacity of 2-1/2 cubic yards or more—which is used to haul dirt, rock, concrete or other construction material—must be equipped with a warning device that operates automatically while the vehicle is:

A) loading

B) braking

C) backing

D) turning

18 / 30

Permanent or temporary stairways are required in a building:

A) when there are no ladders

B) when the building is two or more stories in height

C) when there are no elevators

D) hen the building is three or more stories in height

19 / 30

The contractor or employer must first ask the owner whether asbestos is present in any building or structure built before the year_____ .

A) 1960

B) 1970

C) 1978

D) 1980

20 / 30

Extension ladders must overlap at least _____ of the working length

A) 1%

B) 5%

C) 10%

D) 20%

21 / 30

If a worker can fall 7-1/2 ft or more, Cal/OSHA requires:

A) railings

B) periphery cables

C) safety belts or nets

D) any of the above

22 / 30

Landing platforms must be provided every______ if a worker must climb to a height of greater than 20 ft on a ladder.

A) 10 ft

B) 20 ft

C) 30 ft

D) 40 ft

23 / 30

The maximum length of a TWO-SECTION WOOD EXTENSION ladder is:

A) 30 feet

B) 40 feet

C) 50 feet

D) 60 feet

24 / 30

You must obtain a DOSH permit for:

A) construction of trenches or excavations deeper than 3 ft

B) demolition of any building over one story

C) construction of any structure more than three stories

D) all of the above

25 / 30

What sort of PPE (personal protective equipment) is recommended when using cleaning solvent?

A) eye protection

B) gloves and protective clothing

C) respiratory protection

D) all of the above

26 / 30

Single-cleat ladders may NOT exceed _____ in length.

A) 18 feet

B) 20 feet

C) 24 feet

D) 30 feet

27 / 30

Lumber piles must be no higher than _____ if handled with equipment.

A) 12 feet

B) 16 feet

C) 20 feet

D) 24 feet

28 / 30

Ladder cleats must be:

A) made from clear, straight-grained lumber

B) nailed at each end to the side rails with three 10p nails or their equivalent

C) blocked or notched into the side rails

D) all of the above

29 / 30

When working in areas in which a potential exposure to direct or reflected laser light is greater than_____, employees must be provided with anti-laser eye protection.

A) .005 watt (5 milliwatts)

B) .010 watt (10 milliwatts)

C) 1.000 watt (1000 milliwatts)

D) [OSHA has no such requirement as yet.]

30 / 30

Special drums often containing strong acids will be lined with a PVC lining or ___________.

A) polyethylene

B) stainless steel

C) aluminum

D) nickel

Your score is

The average score is 62%

How much of the California Trade exams focus on Health and Safety?

The percentage focus on health and safety in CSLB exams varies depending on the specific license you’re pursuing. However, it’s generally considered a significant and essential part of most CSLB exams. Here’s a breakdown:

High Focus (20-40%):

Moderate Focus (10-20%):

Lower Focus (Minimal):

Here are some resources to learn more about the health and safety focus of specific CSLB exams:

CSLB Website: The CSLB website provides “Examination Study Guides” for each license. These guides outline the topics covered in the exam, and many will explicitly mention health and safety topics that will be tested. https://www.cslb.ca.gov/contractors/applicants/examination_study_guides/

CSLB Exam Content Outlines: The CSLB may also offer “Content Outlines” for some exams, which detail the exam format and weighting of different topics. These can help you gauge the importance placed on health and safety within the exam.

By reviewing the resources above for your target CSLB license, you can get a clearer picture of the specific health and safety knowledge and practices expected from a licensed contractor in that field.

What are some Health and Safety questions that might be on the test?

The specific health and safety questions on a CSLB exam will depend on the type of license you’re pursuing. However, here are some general examples of health and safety questions you might encounter on various CSLB exams:

Electrical Safety (C-46 Solar Contractor License, C-10 Electrical Contractor License):

What are the National Electrical Code (NEC) requirements for grounding solar photovoltaic (PV) systems?

How do you identify and avoid electrical hazards during solar panel installation?

What personal protective equipment (PPE) is required when working on electrical components?

What are the proper procedures for de-energizing and lockout/tagout of electrical equipment before working on it?

Fall Protection:

What fall protection systems are required when working at heights (above 6 feet)?

How do you inspect and maintain fall protection equipment like harnesses and lifelines?

What are the safe ladder usage practices to prevent falls?

Trench Safety:

What are the OSHA trench safety standards for depth, sloping, and shoring requirements?

How do you identify and avoid potential trench collapses?

What rescue procedures should be followed in case of a trench collapse?

Hazardous Materials:

How do you identify and safely handle asbestos-containing materials (ACMs) (if applicable to your license)?

What are the proper procedures for lead paint removal or abatement (if applicable)?

What personal protective equipment is required when working with hazardous materials?

General Construction Safety:

What are the fire safety protocols for construction sites?

How do you prevent and control dust exposure on a construction site?

What are the safe lifting techniques to avoid back injuries?

How do you recognize and report unsafe work conditions on a construction site?

These are just a few examples, and the actual questions will vary in wording and complexity depending on the exam.

Here are some additional tips for preparing for the health and safety portion of your CSLB exam:

Review the CSLB Examination Study Guide: As mentioned earlier, the CSLB provides study guides that outline the topics covered in each exam. Pay close attention to the health and safety sections.

Focus on Code Requirements: Many health and safety regulations are established by national codes like the National Electrical Code (NEC) or OSHA standards. Understanding these codes will be crucial for answering exam questions.

Practice with Sample Questions: There are various resources online and in textbooks that offer sample CSLB exam questions, including those focused on health and safety including CPE’s practice test above.

By studying the relevant material and understanding the importance of health and safety practices, you can increase your chances of success on the health and safety portion of your CSLB exam.

Related To California Trade Licensing

California B2 Residential Remodeling – Building Planning Exam Prep

Next Entries »

View All

Contact Us



Contractor Practice Exam



California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

How much of the California Trade exams focus on Health and Safety?

What are some Health and Safety questions that might be on the test?

Related To California Trade Licensing

California B2 Residential Remodeling – Building Planning Exam Prep

California B2 Residential Remodeling Scope and Application Exam Prep

Quick California Law and Business Practice Exam

California C39 Roofing Mini Practice Test

California C46 Solar Mini Practice Exam

California C46 Solar Free Practice Exam

Construction Math Free Test

What is a California C46 license?

Cal OSHA Free Test

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com

California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

Report a question

How much of the California Trade exams focus on Health and Safety?

What are some Health and Safety questions that might be on the test?

Related To California Trade Licensing

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com