California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

/30

California Health and Safety Free Test

Want to test your knowledge of the "California Health and Safety" exam? This free practice test is all about helping you ace the concepts you need to pass for your Contractor's License.

Here's the deal: there are over 200 questions lurking in the system, but you'll get 30 random ones to tackle in just 90 minutes. Don't worry, these questions are designed to mirror the kind of stuff you'll need to know.

The best part? This practice test is totally free, and you can take it as many times as you want! No two tests will be the same, so it's a great way to keep practicing and building your knowledge.

Ready to give it a shot? Let's get started!

Please enter your following information to get started:

1 / 30

In a work place, travel distance to a fire extinguisher must not be more than:

A) 25 ft

B) 50 ft

C) 75 ft

D) 100 ft

2 / 30

During hoisting operations, the signaler extends both arms straight out and to the side, with palms down and hands moving rapidly right and left. What is the signaler trying to say?

A) hello

B) dog everything

C) stop

D) EMERGENCY STOP

3 / 30

Double-cleat ladders may NOT exceed _____ in length.

A) 18 feet

B) 20 feet

C) 24 feet

D) 30 feet

4 / 30

Which of the following is a Class-I hazardous location?

A) combustible vapors or gases

B) combustible dust

C) combustible fibers or flyings

D) all of the above

5 / 30

In the interest of safety, what should be done when there is a break or change of elevation of 18inches or more in a hallway floor?

A) Postpone work until the permanent stairway is completed

B) Post a warning sign at least 8 inches × 10 inches in size

C) . Provide a ladder, ramp, or temporary stairs

D) Provide cautionary tape barriers

6 / 30

Safety meetings are required to be held every __________ at the job site.

A) 5 days

B) 10 days

C) month

D) year

7 / 30

Which of the following is safest when you are finished with a power tool?

A) clean the tool

B) warn coworkers that you have just used it

C) post a notice on the machine

D) wait until all motion has stopped before leaving the machine

8 / 30

The minimum width of platforms for light trades is:

A) 18 inches

B) 20 inches

C) 24 inches

D) 36 inches

9 / 30

How often should the boom-angle indicator on a crane be inspected by the operator?

A) every day

B) every week

C) every month

D) every year

10 / 30

If a contractor engages in asbestos abatement work of 100 sq. ft. or more without certification and registration, the contractor is subject to a fine of_____ .

A) not less than $2,000 dollar

B) not less than $5,000 dollars

C) not less than $10,000 dollars

D) not less than $25,000

11 / 30

If more than 50 lbs. of asbestos is removed, it must be transported by a_____ .

A) specialty abatement contractor

B) contractor certified for asbestos abatement work

C) registered hazardous waste hauler

D) All of the above

12 / 30

A _____ ladder is similar to a single cleat ladder, but it is wider, with an additional center rail underneath the cleats that will allow for two-way traffic for workers in ascending and descending, is called a:

A) rail

B) triad

C) center-cleat

D) double-cleat

13 / 30

The operator should inspect an industrial truck, forklift, and industrial tow tractor at least:

A) at the start of the shift

B) once a day

C) once a week

D) every two weeks

14 / 30

Prolonged or even high short-term exposure to crystalline silica can result in:

A) silicosis, lung cancer, and COPD

B) decreased lung function, immune system disorders, and kidney deficits

C) increased chance of developing tuberculosis

D) all of the above

15 / 30

A rope attached to a lifted load to control load spinning or to stabilize a bucket or magnet during material handling is called a:

A) tagline

B) jury rig

C) pendula

D) lagline

16 / 30

The maximum length of a STEP ladder is:

A) 15 feet

B) 20 feet

C) 25 feet

D) 30 feet

17 / 30

A location where there is a significant risk of being injured by electrical hazards, hot corrosive and poisonous substances, falling objects, crushing or penetrating actions, or unusually wet locations would most likely require _____ protection.

A) face or eye

B) hand

C) foot

D) body

18 / 30

A rolling stage requires locking wheels at______ in height.

A) 4ft

B) 6ft

C) 10ft

D) always

19 / 30

A rolling stage requires locking wheels at _____ in height.

A) 4 feet

B) 48 feet

C) 10 feet

D) always

20 / 30

Which of the following is not another name for asbestos?

A) chrysoltile

B) themolite

C) clayrite

D) amosite

21 / 30

A stack of loose brick that reaches _____ high, or a stack of loose masonry block that reaches _____ high must be tapered back at the top.

A) 3 feet … 5 feet

B) 4 feet … 6 feet

C) 5 feet … 7 feet

D) 6 feet … 8 feet

22 / 30

The employer must report to DOSH, any anticipated operations or processes involving asbestos containing more the 1 percent asbestos if the asbestos is to be_____ .

A) sanded

B) sawed

C) cut

D) All of the above

23 / 30

Which of the following tools require a constant-contact on/off switch?

A) circular saws

B) powered tampers

C) rock drills

D) all of the above

24 / 30

The posts, ledgers, ribbons, and bracing for tube and coupler scaffolds must be constructed from ______ steel tubing.

A) 1" ID

B) 2" OD

C) 3"ID

D) 3" OD

25 / 30

What is the minimum plank width for a ladder-jack scaffold?

A) 14 inches

B) 16 inches

C) 18 inches

D) 20 inches

26 / 30

Employees must not be exposed to atmospheres containing less than _____ oxygen and other hazardous atmospheres.

A) 18%

B) 19.5%

C) 20%

D) 20 ppm

27 / 30

During removal, asbestos must be wetted down to keep airborne fibers under control, after removal asbestos must_____ .

A) be placed in leak-tight containers with labels

B) be kept wet

C) be transported to a state approved waste disposal

D) All of the above

28 / 30

What should be done with lifelines, safety harnesses, and shock-absorbing lanyards that have been subjected to impact loading?

A) immediately remove from service and destroy

B) retest and recertify

C) reinforce before reusing

D) call DOSH and shut down the jobsite until they arrive

29 / 30

Which of the following is an approved material for installing a powder-actuated fastener?

A) cast iron, hardened steel, glazed tile, glass block, natural rock, hollow tile, or most brick

B) closer than 1/2 inch from the edge of steel or 3 inches from the unsupported edge of masonry materials

C) any spalled area

D) none of the above

30 / 30

When a ladder is not in use, it should be stored:

A) vertically

B) horizontally

C) on the ground

D) inclined

Your score is

The average score is 62%

How much of the California Trade exams focus on Health and Safety?

The percentage focus on health and safety in CSLB exams varies depending on the specific license you’re pursuing. However, it’s generally considered a significant and essential part of most CSLB exams. Here’s a breakdown:

High Focus (20-40%):

Moderate Focus (10-20%):

Lower Focus (Minimal):

Here are some resources to learn more about the health and safety focus of specific CSLB exams:

CSLB Website: The CSLB website provides “Examination Study Guides” for each license. These guides outline the topics covered in the exam, and many will explicitly mention health and safety topics that will be tested. https://www.cslb.ca.gov/contractors/applicants/examination_study_guides/

CSLB Exam Content Outlines: The CSLB may also offer “Content Outlines” for some exams, which detail the exam format and weighting of different topics. These can help you gauge the importance placed on health and safety within the exam.

By reviewing the resources above for your target CSLB license, you can get a clearer picture of the specific health and safety knowledge and practices expected from a licensed contractor in that field.

What are some Health and Safety questions that might be on the test?

The specific health and safety questions on a CSLB exam will depend on the type of license you’re pursuing. However, here are some general examples of health and safety questions you might encounter on various CSLB exams:

Electrical Safety (C-46 Solar Contractor License, C-10 Electrical Contractor License):

What are the National Electrical Code (NEC) requirements for grounding solar photovoltaic (PV) systems?

How do you identify and avoid electrical hazards during solar panel installation?

What personal protective equipment (PPE) is required when working on electrical components?

What are the proper procedures for de-energizing and lockout/tagout of electrical equipment before working on it?

Fall Protection:

What fall protection systems are required when working at heights (above 6 feet)?

How do you inspect and maintain fall protection equipment like harnesses and lifelines?

What are the safe ladder usage practices to prevent falls?

Trench Safety:

What are the OSHA trench safety standards for depth, sloping, and shoring requirements?

How do you identify and avoid potential trench collapses?

What rescue procedures should be followed in case of a trench collapse?

Hazardous Materials:

How do you identify and safely handle asbestos-containing materials (ACMs) (if applicable to your license)?

What are the proper procedures for lead paint removal or abatement (if applicable)?

What personal protective equipment is required when working with hazardous materials?

General Construction Safety:

What are the fire safety protocols for construction sites?

How do you prevent and control dust exposure on a construction site?

What are the safe lifting techniques to avoid back injuries?

How do you recognize and report unsafe work conditions on a construction site?

These are just a few examples, and the actual questions will vary in wording and complexity depending on the exam.

Here are some additional tips for preparing for the health and safety portion of your CSLB exam:

Review the CSLB Examination Study Guide: As mentioned earlier, the CSLB provides study guides that outline the topics covered in each exam. Pay close attention to the health and safety sections.

Focus on Code Requirements: Many health and safety regulations are established by national codes like the National Electrical Code (NEC) or OSHA standards. Understanding these codes will be crucial for answering exam questions.

Practice with Sample Questions: There are various resources online and in textbooks that offer sample CSLB exam questions, including those focused on health and safety including CPE’s practice test above.

By studying the relevant material and understanding the importance of health and safety practices, you can increase your chances of success on the health and safety portion of your CSLB exam.

Related To California Trade Licensing

California B2 Residential Remodeling – HVAC

Next Entries »

View All

Contact Us



Contractor Practice Exam



California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

How much of the California Trade exams focus on Health and Safety?

What are some Health and Safety questions that might be on the test?

Related To California Trade Licensing

California B2 Residential Remodeling – HVAC

California B2 Residential Remodeling – Plumbing

California B2 Residential Remodeling – Chimneys & Fireplaces Exam Prep

California B2 Residential Remodeling – Roofing Assemblies Exam Prep

California B2 Residential Remodeling – Roof Ceiling Construction Exam Prep

California B2 Residential Remodeling – Wall Covering Exam Prep

California B2 Residential Remodeling – Walls Construction Exam Prep

California B2 Residential Remodeling – Floors Exam Prep

California B2 Residential Remodeling – Foundations Exam Prep

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com

California Health and Safety Free Test

(All trades)

Knowledge needed for multiple licenses.

Welcome to the free timed practice test on California Health and Safety. When you are ready, please start the test below.

Report a question

How much of the California Trade exams focus on Health and Safety?

What are some Health and Safety questions that might be on the test?

Related To California Trade Licensing

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com