California B2 Residential Remodeling – Walls Construction Free Exam

(California)

Walls Construction – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Walls Construction. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

/15

California B2 Residential Remodeling - Walls Construction

Attention B2 Exam Takers! Sharpen your understanding of project limitations and legalities with our FREE 30-minute Walls Construction Challenge!

Boost Your B2 Knowledge:

15 Scenario-Based Questions: Test your ability to identify B2-permissible projects and those requiring a higher license.
Real-World Focus: Gain confidence in applying regulations to common remodeling situations.
Unlimited Attempts: Master the concepts at your own pace. Take the challenge as many times as needed!

Don't gamble on exam day! This challenge is the perfect way to assess your grasp of B2 Walls Construction and ensure you're ready to dominate the exam.

Take Control of Your B2 Journey - Start Your FREE Challenge Today!

Please enter your following information to get started:

1 / 15

In cold-formed steel wall framing, web holes in wall studs and other structural members must have a width not greater than 0.5 times the member depth or__________ .

A) 1/2 inch

B) 1 inch

C) 1-1/2 inches

D) 2 inches

2 / 15

Unless approved anchor straps are used, plate washers, a min. of__________ in size, must be provided between the foundation sill plate and the nut.

A) 0.227” x 1° x 1”

B) 0.228” x 2” x 2"

C) 0.229” x 3” x 3"

D) 0.230" x 4” x 4”

3 / 15

What is the maximum allowable span of a Southern pine girder for exterior bearing walls supporting a roof, a ceiling and one clear-span floor consisting of four 2 x 8s in a building having a width of 12 feet with a ground snow load of 70 psf?

A) 5 feet, 10 inches

B) 6 feet, 1 inches

C) 7 feet, 0 inches

D) 8 feet, 2 inches

4 / 15

In cold-formed steel wall framing, gypsum board must be attached to cold-formed steel wall framing with minimum__________ screws conforming to ASTM C954 or ASTM C1513.

A) No. 4

B) No. 6

C) No. 8

D) No. 10

5 / 15

Any portion of a wall along a braced wall line is permitted to angle out of plane for a max. diagonal length of__________.

A) 2 feet

B) 4 feet

C) 6 feet

D) 8 feet

6 / 15

In cold-formed steel wall framing, load-bearing cold-formed steel studs must have a max. tolerance of __________ between the centerline of the horizontal framing member and the centerline of the vertical framing member.

A) 1/4 inch

B) 1/2 inch

C) 3/4 inch

D) 1 inch

7 / 15

In cold-formed steel wall framing, web holes in wall studs and other structural members must have a web hole length not exceeding__________ .

A) 1-1/2 inches

B) 2-1/2 inches

C) 3-1/2 inches

D) 4-1/2 inches

8 / 15

What is the maximum allowable span of a spruce pine-fir girder for exterior bearing walls supporting a roof, a ceiling and two center-bearing floors consisting of three 2 x 12s in a building having a width of 20 feet with a ground snow load of 30 psf?

A) 7 feet, 0 inches

B) 8 feet, 10 inches

C) 9 feet, 1 inches

D) 11 feet, 6 inches

9 / 15

Exterior walls parallel to a braced wall line must be offset a max. of__________ from the designated braced wall line location.

A) 2 feet

B) 4 feet

C) 6 feet

D) 8 feet

10 / 15

In cold-formed steel wall framing, wall stud must be fastened to top or bottom track using__________ .

A) No. 4 screws

B) No. 6 screws

C) No. 8 screws

D) No. 10 screws

11 / 15

What is the minimum thickness of masonry bearing walls that are more than one story high?

A) 4 inches

B) 6 inches

C) 8 inches

D) 10 inches

12 / 15

In wood wall framing for Seismic Design Categories DO, D1 and D2, braced wall panels must be fastened to the foundations and top plate lap splices must be face-nailed with at least how many 16d nails on each side of the splice?

A) 2

B) 4

C) 6

D) 8

13 / 15

Which of the following is a continuous sheathing method?

A) CS-WSP (Continuously sheathed wood structural panel)

B) PFG (Portal frame at garage)

C) HPS (Hardboard panel siding)

D) GB (Gypsum board)

14 / 15

In wood wall framing, when is mixing intermittent bracing and continuous sheathing methods permitted?

A) from story to story

B) from braced wall line to braced wall line within a story

C) along a braced wall line in SDC A and B

D) All of the above

15 / 15

What is the maximum allowable span of a Douglas fir-larch girder for exterior bearing walls supporting a roof, a ceiling and one center-bearing floor consisting of three 2 x 10s in a building having a width of 24 feet with a ground snow load of 30 psf?

A) 6 feet, 6 inches

B) 7 feet, 2 inches

C) 8 feet, 9 inches

D) 9 feet, 10 inches

Your score is

The average score is 7%

What does the California B2 Residential Remodeling exam consist of?

Last Updated: November 5, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

The California B2 Residential Remodeling exam covers a variety of topics related to the field of residential remodeling. Here’s a breakdown of the major sections you can expect to be tested on:

Planning and Estimating (15%) – This section will test your knowledge on defining the scope of work, ensuring code compliance, identifying design and construction errors, interpreting plans and specifications, and estimating project costs for materials, labor, and equipment.
Job Site Preparation (13%) – This section covers tasks like safely removing non-load-bearing walls, cabinets, and countertops.
Building Materials and Methods (22%) – This section will test your knowledge of different building materials, their properties, and appropriate uses. You’ll also be tested on various construction methods used in residential remodeling.
Construction Details (22%) – This section dives into specific construction details like framing techniques, roof systems, floor systems, wall construction, and installation of doors and windows.
Codes and Standards (18%) – This section assesses your understanding of relevant California building codes and standards that apply to residential remodeling projects.
Business and Legal Issues (10%) – This section covers important business and legal topics for contractors, such as contracts, permits, inspections, worker safety, and insurance requirements.

The California Contractors State License Board (CSLB) provides an official B-2 Residential Remodeling Study Guide that goes into more detail about these topics and offers sample test questions https://www.cslb.ca.gov/contractors/applicants/examination_study_guides/.

Remember, the exam is multiple-choice with four answer options, and a calculator will be provided for any questions requiring calculations. There’s no penalty for guessing, so it’s best to give an answer for every question.

Does the California B2 Residential Exam have questions about Walls Construction?

Yes, the California B2 Residential Remodeling Exam does cover Walls Construction.

The Building Materials and Methods (22%) section likely includes questions about wall construction materials like studs, drywall, insulation, and soundproofing.
The Construction Details (22%) section is more likely to have in-depth questions about wall construction. This might include questions on:
- Different framing techniques for walls (e.g., wood stud walls, metal stud walls)
- Proper installation methods for various wall components
- Techniques for soundproofing walls
- Fire-rated wall assemblies

What could be a question about floors that would be on the California B2 Exam?

Here’s an example of a question on wall construction that you might encounter on the California B2 Residential Remodeling Exam:

Question:

You are remodeling a bathroom and need to install a new shower stall. The existing wall behind the planned shower is a non-load bearing interior wall framed with 2×4 studs at 16″ on center. What additional materials would you typically need to properly prepare this wall for a shower installation?

Possible Answers:

A. Hammer drill and masonry screws
B. Vapor barrier, cement board, and waterproof sealant
C. Steel lintel and additional studs for reinforcement
D. Soundproofing insulation and thicker drywall

Answer: The best answer is B. Vapor barrier, cement board, and waterproof sealant.

Explanation:

For a shower application, the wall needs to be waterproofed to prevent moisture damage. While the other answer choices might be used in other wall construction scenarios, they are not specifically required for waterproofing a shower wall behind the tile.

A. Hammer drill and masonry screws are typically used for attaching things to concrete or masonry, not for shower wall preparation.
C. Steel lintels and additional studs are used for reinforcing load-bearing walls or creating larger openings, not for shower wall prep.
D. Soundproofing insulation and thicker drywall might be used in other parts of the bathroom remodel but not for waterproofing the shower area.

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling – HVAC

Next Entries »

View All