California B2 Residential Remodeling – Roof Ceiling Construction Free Exam

(California)

Roof Ceiling Construction – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Roof Ceiling Construction. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

/15

California B2 Residential Remodeling - Roof Ceiling Construction

Attention B2 Exam Takers! Sharpen your understanding of project limitations and legalities with our FREE 30-minute Roof Ceiling Construction Challenge!

Boost Your B2 Knowledge:

15 Scenario-Based Questions: Test your ability to identify B2-permissible projects and those requiring a higher license.
Real-World Focus: Gain confidence in applying regulations to common remodeling situations.
Unlimited Attempts: Master the concepts at your own pace. Take the challenge as many times as needed!

Don't gamble on exam day! This challenge is the perfect way to assess your grasp of B2 Roof Ceiling Construction and ensure you're ready to dominate the exam.

Take Control of Your B2 Journey - Start Your FREE Challenge Today!

Please enter your following information to get started:

1 / 15

In wood roof framing, rafters and trusses spaced not more than__________ on center are permitted to be attached to their supporting wall assemblies in accordance with Table R602.3(1), if the uplift force does not exceed 200 pounds.

A) 12 inches

B) 16 inches

C) 20 inches

D) 24 inches

2 / 15

In cold-formed steel roof framing, ceiling joists must be connected to the top track of the load-bearing wall with:

A) No. 10 screws applied through the flange of the ceiling joist

B) by using a 54-mil clip angle with the required number of No.10 screws in each leg

C) Either A or B

D) Neither A nor B

3 / 15

True or False: Spaced lumber sheathing is not allowed in Seismic Design Category D2.

Untitled 59 California B2 Residential Remodeling - Roof Ceiling Construction Exam Prep

A) True

B) False

4 / 15

In cold-formed steel roof framing, where continuous joists are framed across interior bearing supports, the interior bearing supports must be located within__________ of midspan of the ceiling joist.

A) 18 inches

B) 24 inches

C) 30 inches

D) 36 inches

5 / 15

Wood structural panel used as roof sheathing in wood roof framing must be installed with joints _____.

A) staggered

B) not staggered

C) Either A or B

D) Neither A nor B

6 / 15

Where 3/8-inch wood structural panels having a span rating of 16/0 are used as roof sheathing, what is the maximum span with edge support?

A) 16 inches

B) 20 inches

C) 24 inches

D) 30 inches

7 / 15

In cold-formed steel roof framing, screws for attaching structural sheathing to cold-formed steel roof framing must be installed with a minimum edge distance of__________

A) 1/8 inch

B) 1/4 inch

C) 3/8 inch

D) 7/8 inch

8 / 15

In wood framed roof systems, an opening can be framed using a single header and single trimmer joists if the header joist span does not exceed__________ and is located within 3 feet of the trimmer joist bearing.

A) 3 feet

B) 4 feet

C) 5 feet

D) 6 feet

9 / 15

In cold-formed steel roof framing, rafters must be fastened to ceiling joists using__________ screws spaced evenly spaced, not less than 1/2" from all edges.

A) No. 4

B) No. 6

C) No. 8

D) No. 10

10 / 15

Wood structural panel roof sheathing must not cantilever more than__________ beyond the gable endwall unless supported by gable overhang framing.

A) 3 inches

B) 5 inches

C) 7 inches

D) 9 inches

11 / 15

Cold-formed steel roof framing must be located in line with load-bearing studs with a max. tolerance of __________ between the centerline of the horizontal framing member and the centerline of the vertical framing member.

A) 1/4 inch

B) 1/2 inch

C) 3/4 inch

D) 1 inch

12 / 15

Where 7/16-inch wood structural panels having a span rating of 24/16 are used as roof sheathing, what is the maximum span without edge support?

A) 16 inches

B) 20 inches

C) 24 inches

D) 30 inches

13 / 15

In wood roof framing, holes bored or cut into members must not be closer than__________ to notches in the member.

A) 1 inch

B) 2 inches

C) 3 inches

D) 4 inches

14 / 15

In cold-formed steel roof framing, rake overhangs must not exceed how many inches measured horizontally?

A) 12 inches

B) 24 inches

C) 36 inches

D) 48 inches

15 / 15

In cold-formed steel roof framing, roof rafters must be connected to a ridge member with a minimum __________ clip angle fastened with No. 10 screws to the ridge member.

A) 2-inch x 2-inch

B) 2-inch x 4-inch

C) 2-inch x 6-inch

D) 2-inch x 8-inch

Your score is

The average score is 0%

Where can I take the California B2 Residential Remodeling Exam?

Last Updated: November 5, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

The California B2 Residential Remodeling Exam is not offered at specific locations. The testing is administered by computer throughout the state at PSI testing centers.

In order to take the exam, you will need to schedule an appointment with PSI after you have submitted your application and it has been approved by the Contractors State License Board (CSLB). You can find more information about the application process and the exam itself on the CSLB website.

While PSI conducts the California B2 Residential Remodeling Exam, you won’t apply for the exam directly through them. The application process goes through the Contractors State License Board (CSLB).

Here’s how to navigate the application for the B2 license and exam:

CSLB Contractor License Application: Apply for the B2 license through the CSLB website [CA.gov CSLB Contractors License Exam]. This will involve meeting the experience requirements, submitting necessary documents, and paying fees.
CSLB Exam Notification: Once your application is approved, the CSLB will send you a Notice to Schedule for Examination with instructions for scheduling your test with PSI.
PSI Scheduling: Use the information provided by CSLB to schedule your exam with PSI. You can schedule online at the PSI website or by phone at (877) 392-6422.

Here are some helpful resources:

CSLB Examination FAQ: [CA.gov CSLB Examinations Frequently Asked Questions]
PSI Construction Testing: https://www.psiexams.com/licensure/construction/

Will there be questions about Roof Ceiling Construction on the California B2 exam?

The B2 Residential Remodeling Exam may cover roof and ceiling construction to a limited extent, but it won’t be a major focus. Here’s why:

Exam Focus: The B2 exam primarily concentrates on non-structural remodeling aspects. It emphasizes knowledge of building codes, planning, estimating, core trades (electrical, plumbing, etc.), and safety procedures ([CA.gov CSLB Contractors License Exam]).
Limited Scope: While a B2 license allows for roof repairs, it doesn’t cover roof replacements or structural work on ceilings. These require additional licenses like C-39 (Roofing) or a B license.

That being said, you might encounter questions related to:

Basic Roof Repair Techniques: This could involve identifying and repairing minor leaks, flashing issues, or replacing shingles.
Ceiling Materials and Installation: Understanding different ceiling types (drywall, plaster, etc.) and basic installation methods might be relevant.
Building Code Compliance: Questions might test your knowledge of relevant building codes for roof repairs or ceiling materials in your area.

Here are some resources to help you prepare:

CSLB B2 Residential Remodeling Study Guide: This official guide outlines the exam content, including a small section on Exterior Remodeling which might touch on roof repairs ([CA.gov CSLB Contractors License Exam]).
Roofing Industry Resources: Familiarizing yourself with basic roof construction and repair methods from industry sources could be beneficial.

Remember, the B2 exam prioritizes general remodeling knowledge. Focus your studying on core trades, safety, and planning aspects.

What could be a question about roof ceiling construction that could be on the California B2 Exam?

Question: You are remodeling a bathroom and discover a small water stain on the bathroom ceiling. There is no visible leak in the plumbing above the ceiling. What is the MOST LIKELY source of the water damage?

A. Faulty caulking around the bathtub
B. Leaky roof flashing around the vent pipe
C. Condensation buildup from the shower
D. Broken water supply line to the toilet

Answer: The B option, Leaky roof flashing around the vent pipe, is the most likely culprit.

Explanation: While the other options could cause water damage in a bathroom, they wouldn’t necessarily manifest as a stain on the ceiling. A leak around a vent pipe on the roof could travel down through the structure and show up as a stain on the bathroom ceiling. This scenario tests your knowledge of potential roof-related water damage affecting the interior ceiling, which is relevant for a B2 contractor to identify during a remodel.

Remember: This is just an example, and the actual exam questions may vary. Focus on understanding core remodeling principles and how they relate to potential issues like roof leaks impacting the ceiling.

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling – HVAC

Next Entries »

View All

Submit a Review



Contractor Practice Exam



California B2 Residential Remodeling – Roof Ceiling Construction Free Exam

(California)

Roof Ceiling Construction – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Roof Ceiling Construction. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

Where can I take the California B2 Residential Remodeling Exam?

Will there be questions about Roof Ceiling Construction on the California B2 exam?

What could be a question about roof ceiling construction that could be on the California B2 Exam?

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling – HVAC

California B2 Residential Remodeling – Plumbing

California B2 Residential Remodeling – Chimneys & Fireplaces Exam Prep

California B2 Residential Remodeling – Roofing Assemblies Exam Prep

California B2 Residential Remodeling – Wall Covering Exam Prep

California B2 Residential Remodeling – Walls Construction Exam Prep

California B2 Residential Remodeling – Floors Exam Prep

California B2 Residential Remodeling – Foundations Exam Prep

California B2 Residential Remodeling – Building Planning Exam Prep

Submit a Review

Contractor Practice Exam

admin@contractorpracticeexam.com

Contractor Practice Exam

admin@contractorpracticeexam.com

(772) 202-2058 - Text or Call Anytime

California B2 Residential Remodeling – Roof Ceiling Construction Free Exam

(California)

Roof Ceiling Construction – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Roof Ceiling Construction. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

Report a question

Where can I take the California B2 Residential Remodeling Exam?

Will there be questions about Roof Ceiling Construction on the California B2 exam?

What could be a question about roof ceiling construction that could be on the California B2 Exam?

Related To California B2 Residential Remodeling Licensing

Submit a Review

Contractor Practice Exam

admin@contractorpracticeexam.com