California B2 Residential Remodeling – Floors Free Exam

(California)

Floors – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Floors. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

/15

California B2 Residential Remodeling - Floors

Attention B2 Exam Takers! Sharpen your understanding of project limitations and legalities with our FREE 30-minute Floors Challenge!

Boost Your B2 Knowledge:

15 Scenario-Based Questions: Test your ability to identify B2-permissible projects and those requiring a higher license.
Real-World Focus: Gain confidence in applying regulations to common remodeling situations.
Unlimited Attempts: Master the concepts at your own pace. Take the challenge as many times as needed!

Don't gamble on exam day! This challenge is the perfect way to assess your grasp of B2 Floors and ensure you're ready to dominate the exam.

Take Control of Your B2 Journey - Start Your FREE Challenge Today!

Please enter your following information to get started:

1 / 15

In cold-formed steel floor framing, blocking must be installed between__________ for single continuous floor joists across bearing supports.

A) every joist

B) every other joist

C) every fifth joist

D) every tenth joist

2 / 15

In cold-formed steel floor framing, floor joists supporting jamb studs with multiple members must have __________ bearing stiffeners.

A) one

B) two

C) three

D) four

3 / 15

In cold-formed steel floor framing, how many feet toward the inside must doubled cantilevered joists extend?

A) 4 feet

B) 6 feet

C) 8 feet

D) 10 feet

4 / 15

The max. allowable live load of wood structural panels used for subfloor sheathing is__________ when wood structural panels have a span rating of 32/16 and a span separation at 24” o.c.

A) 30 psf

B) 50 psf

C) 70 psf

D) 90 psf

5 / 15

In exterior decks, beam plies must be fastened with two rows of 10d nails minimum at__________ o.c. along each edge.

A) 10 inches

B) 12 inches

C) 14 inches

D) 16 inches

6 / 15

In exterior decks, the ends of beams must have not less than__________ of bearing on concrete or masonry for the entire width of the beam.

A) 1 inch

B) 2 inches

C) 3 inches

D) 4 inches

7 / 15

In cold-formed steel floor framing, anchor bolts must be located a maximum of ______ the termination of bottom tracks.

A) 10 inches

B) 12 inches

C) 14 inches

D) 16 inches

8 / 15

Wood-framed exterior decks, must have corrosion-resistant metal flashing a min. of__________ thick.

A) 0.019 inch

B) 0.119 inch

C) 1.019 inch

D) 1.119 inch

9 / 15

The maximum joist cantilever for exterior wood decks must be limited to__________ of the joist span or the maximum cantilever length specified in Table R507.6, whichever is less.

A) one-eighth

B) one-fourth

C) one-third

D) one-half

10 / 15

In cold-formed steel floor framing, floor cantilevers for the top floor of a two- or three-story building or the first floor of a one-story building must not exceed how many inches?

A) 12 inches

B) 18 inches

C) 24 inches

D) 30 inches

11 / 15

Track sections of load-bearing cold-formed steel floor framing members must have a minimum flange width of__________.

A) 1 inch

B) 1-1/4 inch

C) 1-1/2 inch

D) 2 inches

12 / 15

In cold-formed steel floor framing, web hole length in floor joists must not exceed__________ .

A) 1-1/2 inches

B) 2-1/2 inches

C) 3-1/2 inches

D) 4-1/2 inches

13 / 15

In a single-level wood-framed decks with beams, what is the maximum height of a deck post sized 4x6?

A) 6 feet

B) 8 feet

C) 10 feet

D) 12 feet

14 / 15

Cold-formed steel-framed floors must be anchored to__________.

A) foundations

B) wood sills

C) load-bearing walls

D) Any of the above

15 / 15

Where continuous joist members are used, the interior bearing supports must be located within _____ of midspan of the cold-formed steel joists.

Untitled 43 California B2 Residential Remodeling - Floors Exam Prep

A) 2 feet

B) 4 feet

C) 6 feet

D) 8 feet

Your score is

The average score is 40%

Where can I take the California B2 Residential Remodeling Exam?

The California B2 Residential Remodeling Exam isn’t taken at a specific location but rather through a computer-based testing program offered by Pearson VUE (https://home.pearsonvue.com/Test-takers.aspx).

The Contractors State License Board (CSLB) which administers the B2 license process partners with Pearson VUE for exam delivery. Once you meet the CSLB’s requirements to take the exam, you’ll schedule your exam appointment directly with Pearson VUE. Their website allows you to search for testing centers near you and select a convenient date and time.

Does the California B2 Residential Exam have questions about Floors?

Yes, the California B2 Residential Remodeling Exam is likely to have questions about floors. Floors are a core element of residential remodels, and understanding different floor types, installation methods, and potential problems falls within the scope of a B2 license.

Here’s why you can expect floor-related questions on the B2 exam:

B2 License Scope: B2 licenses allow work on finish trades, which includes installing and repairing various floor coverings [2].
Exam Focus on Remodeling Activities: The B2 exam tests knowledge and skills directly applicable to residential remodeling projects [1]. Since floors are frequently updated during renovations, they’re a relevant topic.

The specific floor-related questions you might encounter could cover:

Types of Flooring: Identifying common floor materials (carpet, hardwood, tile, laminate) and their suitability for different areas (kitchen, bathroom, living room).
Floor Selection Considerations: Understanding factors like moisture resistance, durability, and maintenance requirements for selecting appropriate flooring for a project.
Floor Installation Basics: Knowing general installation processes for various floor coverings, including subfloor preparation and potential challenges.
Identifying Floor Problems: Recognizing signs of floor damage (e.g., warping, cracks, unevenness) and potential causes.

By studying these areas, you’ll be well-prepared for floor-related questions on the B2 exam. The CSLB’s B-2 Residential Remodeling Study Guide is a valuable resource for this purpose (https://www.cslb.ca.gov/contractors/applicants/examination_study_guides/)

What could be a question about floors that would be on the California B2 Exam?

ere’s an example of a question about floors you might encounter on the California B2 Residential Remodeling Exam:

Scenario: A client wants to replace the carpeting in their basement with ceramic tile. What is an IMPORTANT consideration when selecting tile for a basement floor?

Possible Answers:

A. Choosing a tile with a bold pattern to create a dramatic look.
B. Matching the color of the tile to the existing carpet.
C. Selecting a tile with a water-resistant backing.
D. Choosing a tile with the most affordable price per square foot.

The best answer would be C. Selecting a tile with a water-resistant backing. Basements are prone to moisture issues, and selecting water-resistant tiles demonstrates an understanding of appropriate materials for the environment. This showcases your knowledge within the B2 license limitations where you can recommend but not necessarily perform structural waterproofing.

This is just one example, and the actual questions might vary in format and difficulty. However, focusing on the core principles mentioned earlier (floor types, selection considerations, installation basics, problem identification) will prepare you well for floor-related questions on the B2 exam.

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling Exam Prep

View All

Contact Us



Contractor Practice Exam



California B2 Residential Remodeling – Floors Free Exam

(California)

Floors – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Floors. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

Where can I take the California B2 Residential Remodeling Exam?

Does the California B2 Residential Exam have questions about Floors?

What could be a question about floors that would be on the California B2 Exam?

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling Exam Prep

California B2 Residential Remodeling – Electrical Exam Prep

California B2 Residential Remodeling – Estimating Exam Prep

California B2 Residential Remodeling – Roofing Exam Prep

California B2 Residential Remodeling – Painting Exam Prep

California B2 Residential Remodeling – Rough Carpentry Exam Prep

California B2 Residential Remodeling – Flooring Exam Prep

California B2 Residential Remodeling – Finish Carpentry

California B2 Residential Remodeling – HVAC

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com

California B2 Residential Remodeling – Floors Free Exam

(California)

Floors – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Floors. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

Report a question

Where can I take the California B2 Residential Remodeling Exam?

Does the California B2 Residential Exam have questions about Floors?

What could be a question about floors that would be on the California B2 Exam?

Related To California B2 Residential Remodeling Licensing

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com