California B2 Residential Remodeling – Electrical
Free Exam

(California)

Electrical – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Electrical. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

/15

California B2 Residential Remodeling - Electrical Exam Prep

Attention B2 Exam Takers! Sharpen your understanding of project limitations and legalities with our FREE 30-minute Electrical Challenge!

Boost Your B2 Knowledge:

15 Scenario-Based Questions: Test your ability to identify B2-permissible projects and those requiring a higher license.
Real-World Focus: Gain confidence in applying regulations to common remodeling situations.
Unlimited Attempts: Master the concepts at your own pace. Take the challenge as many times as needed!

Don't gamble on exam day! This challenge is the perfect way to assess your grasp of B2 Electrical and ensure you're ready to dominate the exam.

Take Control of Your B2 Journey - Start Your FREE Challenge Today!

Please enter your following information to get started:

1 / 15

Voltage drops at the end of run, caused by overly long wire runs, will result in __________.

A) lights dimming

B) one fixture not lighting

C) the entire system not lighting

D) fuse blows after several minutes of operation

2 / 15

The only place the house neutral should be bonded to the ground is at the __________.

A) subpanel

B) service box

C) distribution panel

D) None of the above

3 / 15

What is the maximum dimensions of a lighting fixture that may be supported only by the screw shell of the lampholder?

A) 12 inches

B) 16 inches

C) 18 inches

D) 20 inches

4 / 15

_________ may cause a circuit breaker to trip or simulate a blown fuse.

A) Faulty fixture wiring

B) A loose fuse

C) A faulty GFI

D) All of the above

5 / 15

How must a branch circuit supplying a domestic water heater with a capacity of 120 gallons or less be sized?

A) 100 percent of its nameplate rating

B) 110 percent of its nameplate rating

C) 125 percent of its nameplate rating

D) 150 percent of its nameplate rating.

6 / 15

Feeder wires from the main panel to the subpanel should be protected by __________.

A) providing fuses at the main panel

B) providing fuses at the subpanel

C) the main house fuses

D) None of the above

7 / 15

A blown fuse or circuit breaker may result in the __________.

A) entire system not lighting

B) breaker tripping after several minutes of operation

C) breaker tripping when the system is turned on

D) GFI tripping

8 / 15

A bad switch or connection to power may result in the __________.

A) breaker tripping when the system is turned on

B) entire system not lighting

C) GFI tripping after several minutes of operation

D) dim lights

9 / 15

What is the maximum weight of a lighting fixture that is supported only by an outlet box?

A) 6 pounds

B) 10 pounds

C) 25 pounds

D) 50 pounds

10 / 15

Lighting loads are based on 3__________ , which includes all small appliance receptacles

A) watts per sq. ft.

B) amps per each

C) watts

D) amps

11 / 15

If wire is run through a box without a connection or splice in that box, __________ is needed in that box.

A) no slack

B) slack enough to permit easy connection

C) a folded slack loop

D) A and C only

12 / 15

The __________ wire can sometimes safely dissipate electricity from smaller lightning strikes.

A) earth ground

B) neutral ground

C) equipment ground

D) grounding electrode conductor

13 / 15

When an entire system won’t light, the problem is a poor connection at the junction box or receptacle if it is found that __________ .

A) the 12-volt fuses and breakers are bad

B) the 120-volt fuses and breakers are bad

C) both 12-volt and 120-volt fuses, breakers and leads are still good

D) All of the above

14 / 15

typical wet-niche fixture must be installed below the water line at least __________.

A) 12 inches

B) 15 inches

C) 18 inches

D) 24 inches

15 / 15

A simple basic House Load calculation includes estimating the __________.

A) house square footage

B) large appliances

C) special loads

D) All of the above

Your score is

The average score is 55%

How important is Electrical Knowledge for the California B2 Residential Remodeling Exam?

Last Updated: November 9, 2024

5.0

5.0 out of 5 stars (based on 1 review)

Let us know what you think!

Electrical knowledge is essential for the California B2 Residential Remodeling Exam.

While the B2 license doesn’t permit you to install or extend new electrical systems, it does require a solid understanding of electrical systems for several reasons:

Project Management: You’ll need to coordinate with electricians, understand electrical blueprints, and ensure electrical work complies with building codes.
Safety: Electrical work is inherently dangerous. A basic understanding of electrical systems helps you identify potential hazards and protect yourself and your clients
Code Compliance: You must know the electrical codes to ensure your remodeling projects meet legal requirements.
Client Communication: Understanding electrical systems helps you communicate effectively with clients about their needs and options.

Key areas of electrical knowledge to focus on:

Basic electrical theory and components
Electrical codes and regulations
Electrical safety practices
Electrical system troubleshooting
Permitting and inspection processes

Remember: While you won’t be performing electrical work yourself, a strong foundation in electrical knowledge will make you a more competent and successful residential remodeler.

How many questions are likely to involve Electrical Knowledge for the California B2 Residential Remodeling Exam?

The California B2 Residential Remodeling Exam is designed to test knowledge in various areas related to residential remodeling, including electrical work. While the exact number of questions on electrical knowledge may vary depending on the specific version of the exam, electrical work typically represents a significant portion of the exam because it is a critical aspect of remodeling.

Generally, electrical knowledge could account for about 10-20% of the exam questions. This can include understanding electrical systems, wiring, safety codes, and other related topics.

To get a precise breakdown, it would be best to consult the official exam content outline provided by the California Contractors State License Board (CSLB) or specific study materials tailored for this exam.

What are some questions about Electrical that may be on the California B2 Residential Remodeling Exam?

The California B2 Residential Remodeling Exam may include questions related to electrical work that cover a variety of topics. Here are some example questions that could be on the exam:

1. Basic Electrical Theory:

Q: What is the function of a circuit breaker in an electrical system?
A: A circuit breaker is a safety device designed to protect an electrical circuit from damage caused by overload or short circuit. It interrupts the flow of electricity if the current exceeds a safe level.

2. Wiring Methods and Materials:

Q: What is the minimum gauge wire required for a 20-ampere circuit?
A: The minimum gauge wire required for a 20-amp circuit is 12 AWG (American Wire Gauge).

3. Electrical Codes and Safety Standards:

Q: According to the National Electrical Code (NEC), what is the required distance between electrical outlets in a residential living room?
A: The NEC requires that outlets be placed so that no point along the floor line in any wall space is more than 6 feet from an outlet.

4. Lighting and Fixtures:

Q: What is the maximum wattage for a lighting fixture installed in a closet?
A: According to the NEC, the maximum wattage for an incandescent light fixture in a closet is 60 watts.

5. Electrical Troubleshooting:

Q: If a GFCI outlet repeatedly trips, what could be the potential causes?
A: Potential causes for a GFCI outlet tripping include a ground fault, an overloaded circuit, or a malfunctioning GFCI device.

6. Service Panels and Subpanels:

Q: What is the minimum height requirement for mounting an electrical service panel?
A: The NEC requires that the top of the service panel be no more than 6 feet 7 inches above the floor.

7. Load Calculations:

Q: How do you calculate the electrical load for a new room addition to ensure the existing service panel can handle the additional demand?
A: The electrical load is calculated by adding the wattage of all appliances, lighting, and outlets, then dividing by the voltage to find the amperage. This total is then compared to the capacity of the service panel.

8. Grounding and Bonding:

Q: What is the purpose of grounding an electrical system in residential construction?
A: Grounding provides a path for electrical current to return to the ground in case of a fault, helping to prevent electric shocks and reduce the risk of fire.

9. Conduit and Cable Installation:

Q: What type of conduit is typically used for outdoor wiring to protect against moisture?
A: PVC (Polyvinyl Chloride) conduit is commonly used for outdoor wiring due to its resistance to moisture.

10. Energy Efficiency and Electrical Upgrades:

Q: What are the benefits of upgrading to LED lighting in a residential remodel?
A: LED lighting is more energy-efficient, has a longer lifespan, and produces less heat compared to traditional incandescent or fluorescent bulbs.

These sample questions give an idea of the range of topics that could be covered in the electrical section of the California B2 Residential Remodeling Exam.

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling – Plumbing

Next Entries »

View All

Submit a Review



Contractor Practice Exam



California B2 Residential Remodeling – Electrical
Free Exam

(California)

Electrical – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Electrical. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

How important is Electrical Knowledge for the California B2 Residential Remodeling Exam?

How many questions are likely to involve Electrical Knowledge for the California B2 Residential Remodeling Exam?