Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

Hey there, future license holder! We know you’re serious about getting that license, and we want to help you succeed. Whether your exam is open book or closed book, the key is getting familiar with the references recommended in the Candidate Information Bulletin (CIB). This will make you a whiz at finding information during the exam, regardless of the format.

Here’s the lowdown on how to conquer your studies:

Start Early, Reap the Benefits (Step 1):

Don’t wait until the last minute to cram! Aim to start studying at least 3-6 weeks beforehand. The earlier you begin, the more time your brain has to absorb and retain the information.

Step 2: Find Your CIB – Your Exam Roadmap:

Think of the CIB as your treasure map to exam success. It tells you everything you need to know about the specific areas your exam will focus on. You can find your CIB by visiting your state’s licensing board website or the exam provider’s website (often run by the state government). If you get stuck, don’t hesitate to reach out to us for help!

Step 3: Gear Up with the Right References:

We don’t sell reference materials ourselves, but we can be your friendly neighborhood guide. Our website has links to publishers, booksellers, and even free PDFs or HTML versions of references (and statutes) when available.

Step 4: Highlight Like a Pro (Step 4):

Once you have your references, use the CIB to identify the subject areas that will be covered on the exam. Highlight or tab these areas in your reference materials. You can even color-code them based on the importance (number of questions) mentioned in the CIB.

Step 5: Not All Codes Are Created Equal (Step 5):

Exam bulletins often reference large sections of code, but chances are, you won’t need to study everything. Focus on the sections that directly apply to your trade. For instance, if you’re taking a General Builder exam, any section of the building code would be relevant.

Step 6: Craft Your Study Schedule – Be Realistic (Step 6):

Grab a calendar and mark your exam date along with any other commitments you have. Be honest with yourself about how much study time you can realistically dedicate each day. Prioritize the subject areas based on their importance and how many questions they cover on the exam.

Avoid Burnout! Take Breaks!

Studying for long stretches can be overwhelming. Aim for study sessions of no more than two hours at a time. Take breaks in between to refresh your mind – grab a coffee, step outside, or do a quick brain break activity.

Step 7: Practice Makes Perfect (Almost!):

Our practice exams are a fantastic way to test your knowledge and get comfortable with the question format. When you take a practice exam, make notes on where you found the answers in the reference materials. This will help you solidify your understanding of the concepts.

Step 8: Learn Your Way:

We all learn differently! Some people learn best by seeing things written down (visual learners), others by hearing them (auditory learners), and some by doing hands-on activities (kinesthetic learners). Figure out what learning style works best for you and tailor your studying accordingly.

Step 9: Don’t Get Lost in the Notes:

Our practice tests are a great starting point, but don’t just rely on them blindly. Use the CIB’s subject area list to focus on the most relevant information. Don’t be afraid to explore the reference materials and make connections between different topics.

Step 10: Deep Dive with the Answer Key:

Most questions in our practice exams have an answer key with the exact citation from the reference material. Use this to your advantage! Highlight important information in your references and make notes to create a strong understanding of the concepts.

Step 11: Keep Your Notes Organized:

Don’t let your notes become a jumbled mess! Keep them all together – either write them directly on the printed materials or use the comment tool in a PDF file. Review your notes regularly, especially when revisiting the tabbed sections in your references.

Step 12: Embrace the Challenge, Decipher the Code:

Codes and legal documents can be tricky beasts, filled with complex sentences and legalese. Don’t get discouraged! Take the time to break down confusing sections and rewrite them in a way that makes sense to you.

Bonus Tip: Find a Code-Breaking Buddy:

Consider reaching out to a law student

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

/25

Walker's, Building Estimator's Reference Book, 29th Edition Free Test

Calling all Florida roofing aces! Want to see how well you can estimate like a pro? This FREE practice test is designed to put your skills using Walker's Building Estimator's Reference Book (29th Edition) to the test!

Here's the challenge:

25 Question Blitz: Answer 25 questions specifically crafted from the reference book in just 75 minutes. Time to show off your estimating knowledge!
Always Fresh: No two tests are ever the same! Each time you take it, you'll get a new set of questions to keep things interesting.
Free for All: This practice test is completely FREE! No need to break the bank to sharpen your skills. 🆓
Practice Makes Perfect: Didn't score as high as you'd like? No problem! Take the test as many times as you need until you feel confident tackling any estimating challenge, especially those on the Florida Roofing License exam!

So grab your favorite calculator, put on your thinking cap, and get ready to conquer those estimates! Good luck!

Please enter your following information to get started:

1 / 25

After acquiring a piece of construction equipment, the contractor should _________________.

A) Divide the lease payments by the number of jobs in progress and charge each accordingly

B) Divide the annual depreciation by the number of estimated jobs for the year for a per-job charge

C) Develop an hourly rate charge, sufficient to cover interest charges and replacement costs

D) Develop a chargeable rate that is comparable to the local rental rates for similar equipment

2 / 25

Under the Uniform System developed by the Construction Specifications Institute (CSI) Division 2 includes ___________.

A) General requirements

B) Subsurface Investigation

C) Concrete

D) Finishes

3 / 25

The typical dead weight of a ¾ inch piece of structural plywood is __________ lbs.

A) 12.8

B) 28

C) 38.4

D) 71

4 / 25

__________ board feet of wood would be required to build a partition wall that measures 8' high 25' long and is 4" thick with one 2 x 4 sole plate but a double plate at the top. n center. Select the closet answer.

A) 16.66

B) 33.33

C) 96

D) 126

5 / 25

Vermiculite is a mineral that expands, when heated, to about ___________ times its original size

A) 8

B) 10

C) 12

D) 14

6 / 25

When hauling excavated materials in trucks, the truck capacity should be at least _____ times the dipper or bucket capacity of the excavator.

A) Two

B) Three

C) Four

D) Five

7 / 25

Site clearing and grading are covered under Division ______ of the CSI Uniform System of Specifications.

A) 02

B) 10

C) 15

D) 21

8 / 25

When renting non-tractor equipment, the __________is usually responsible for the cost of repairs due to normal wear and tear.

A) Lessor

B) Lessor

C) Lessee

D) Insurance company

9 / 25

2600 L.F. of 2 x is ____________board feet. Select the closest answer.

A) 144

B) 650

C) 1,734

D) 2,600

10 / 25

The principal objective of a construction schedule is to _______________________.

A) Support claims against the owner

B) Assist architect in planning project completion

C) Efficiently manage resources in order to complete within the estimated time and costs for the project

D) Track progress of all subcontractors on the project

11 / 25

Plans and elevations are usually drawn at no less than _______ .

A) 1/16" = 1' 0"

B) 1/8 " = 1 ' 0"

C) 3/16 = 1' 0"

D) 1/4" = 1' 0"

12 / 25

According to Walker's, which of the following statements is not correct?

A) total float is obtain by subtracting its' ES from its' LS time

B) total float is obtain by subtracting its' EF from its' ES time

C) the use of total float for one activity will reduce it by a like amount in other items

D) the activities in a chain share total float

13 / 25

A blueprint shows a rectangular building lot that scales out a 15.0" by 22.5". The scale given for the site plan is 1" = 12'. The area of the building lot is ______________ square feet. Select the closest answer.

A) 4,860

B) 33,750

C) 48,600

D) 53,460

14 / 25

Another reference name for a Bar Chart is a _________________.

A) Pert Chart

B) Gantt Chart

C) Precedence Diagram

D) CPM Chart

15 / 25

The standard tool for resource control in project scheduling which calculates the project completion date and dates for completion of project activities and intermediate milestones is the ________________________ .

A) Bar Chart

B) Genii Chart

C) Critical Path Method (CPM)

D) Master Network

16 / 25

The type of excavating equipment selected, as well as the size of the equipment required for a project, should be based on the ______________.

A) Driving distance to the job site

B) Availability of specific man power

C) Qualification of the equipment operator

D) Volume of material to be moved

17 / 25

According to a set of plans, a contractor is to construct a residential structure that measures 40'x60' with a hip slope sloped at 5/12 slope. The total area of the roof is _________________ square feet. Select the closest answer.

A) 2,000

B) 2,400

C) 2,600

D) 3,000

18 / 25

____________ standard bricks are required to build an ft x 20 ft wall . Select the closest answer.

A) 1,333

B) 2,666

C) 3,999

D) 3,123

19 / 25

The terms CPM and PERT pertain to __________________.

A) The specifications

B) Scheduling

C) The inventory

D) Contract performance management

20 / 25

________ is the amount of time for an activity, obtained by subtracting its early start (ES) from its late start (LS) or early finish (EF) from its late finish (LF).

A) Total float

B) Forward scheduling

C) Backward scheduling

D) Mean flow time

21 / 25

The average life expectancy of tires in construction work is from _______ to ________ hours.

A) 2,000 2,500

B) 2,500 3,000

C) 3,000 3,500

D) 3,500 4,000

22 / 25

_____________are drawings in which all horizontal and vertical lines have true length and vertical lines are vertical but horizontal lines are set at 30 degrees or -30 degrees.

A) Obliques

B) Schematics

C) Isometrics

D) Orthographics

23 / 25

Which one of these is not one of the three traditional methods of construction scheduling?

A) Project Schedule

B) Critical Path Method (CPM)

C) Bar (or Gantt) Charts

D) Program Evaluation and Review Technique (PERT)

24 / 25

Another name for a major arch is a _________________ arch.

A) Gothic

B) Back

C) Segmental

D) Relieving

25 / 25

If #3 reinforcement bars are to be lapped a minimum of 30 times the bar diameter, the minimum length of bar lap is inches. Select the closest answer.

A) 8

B) 9

C) 11

D) 11.25

Your score is

The average score is 49%

Check out all of the tests we offer at Contractor Practice Exam

Next Entries »

View All

Contact Us



Contractor Practice Exam



Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

Check out all of the tests we offer at Contractor Practice Exam

AIA A401 Free Test

AIA A701 Free Test

Florida Roofing Practice Test

Florida Free Roofing Practice Test

OSHA Free Practice Test

Minnesota Residential Roofer Practice Test

ICC F14 Free Roofing Exam

Minnesota Residential Roofer Free Test

ICC F14 Roofing License Practice Test

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com

Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

Report a question

Check out all of the tests we offer at Contractor Practice Exam

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com