Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

Hey there, future license holder! We know you’re serious about getting that license, and we want to help you succeed. Whether your exam is open book or closed book, the key is getting familiar with the references recommended in the Candidate Information Bulletin (CIB). This will make you a whiz at finding information during the exam, regardless of the format.

Here’s the lowdown on how to conquer your studies:

Start Early, Reap the Benefits (Step 1):

Don’t wait until the last minute to cram! Aim to start studying at least 3-6 weeks beforehand. The earlier you begin, the more time your brain has to absorb and retain the information.

Step 2: Find Your CIB – Your Exam Roadmap:

Think of the CIB as your treasure map to exam success. It tells you everything you need to know about the specific areas your exam will focus on. You can find your CIB by visiting your state’s licensing board website or the exam provider’s website (often run by the state government). If you get stuck, don’t hesitate to reach out to us for help!

Step 3: Gear Up with the Right References:

We don’t sell reference materials ourselves, but we can be your friendly neighborhood guide. Our website has links to publishers, booksellers, and even free PDFs or HTML versions of references (and statutes) when available.

Step 4: Highlight Like a Pro (Step 4):

Once you have your references, use the CIB to identify the subject areas that will be covered on the exam. Highlight or tab these areas in your reference materials. You can even color-code them based on the importance (number of questions) mentioned in the CIB.

Step 5: Not All Codes Are Created Equal (Step 5):

Exam bulletins often reference large sections of code, but chances are, you won’t need to study everything. Focus on the sections that directly apply to your trade. For instance, if you’re taking a General Builder exam, any section of the building code would be relevant.

Step 6: Craft Your Study Schedule – Be Realistic (Step 6):

Grab a calendar and mark your exam date along with any other commitments you have. Be honest with yourself about how much study time you can realistically dedicate each day. Prioritize the subject areas based on their importance and how many questions they cover on the exam.

Avoid Burnout! Take Breaks!

Studying for long stretches can be overwhelming. Aim for study sessions of no more than two hours at a time. Take breaks in between to refresh your mind – grab a coffee, step outside, or do a quick brain break activity.

Step 7: Practice Makes Perfect (Almost!):

Our practice exams are a fantastic way to test your knowledge and get comfortable with the question format. When you take a practice exam, make notes on where you found the answers in the reference materials. This will help you solidify your understanding of the concepts.

Step 8: Learn Your Way:

We all learn differently! Some people learn best by seeing things written down (visual learners), others by hearing them (auditory learners), and some by doing hands-on activities (kinesthetic learners). Figure out what learning style works best for you and tailor your studying accordingly.

Step 9: Don’t Get Lost in the Notes:

Our practice tests are a great starting point, but don’t just rely on them blindly. Use the CIB’s subject area list to focus on the most relevant information. Don’t be afraid to explore the reference materials and make connections between different topics.

Step 10: Deep Dive with the Answer Key:

Most questions in our practice exams have an answer key with the exact citation from the reference material. Use this to your advantage! Highlight important information in your references and make notes to create a strong understanding of the concepts.

Step 11: Keep Your Notes Organized:

Don’t let your notes become a jumbled mess! Keep them all together – either write them directly on the printed materials or use the comment tool in a PDF file. Review your notes regularly, especially when revisiting the tabbed sections in your references.

Step 12: Embrace the Challenge, Decipher the Code:

Codes and legal documents can be tricky beasts, filled with complex sentences and legalese. Don’t get discouraged! Take the time to break down confusing sections and rewrite them in a way that makes sense to you.

Bonus Tip: Find a Code-Breaking Buddy:

Consider reaching out to a law student

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

/25

Walker's, Building Estimator's Reference Book, 29th Edition Free Test

Calling all Florida roofing aces! Want to see how well you can estimate like a pro? This FREE practice test is designed to put your skills using Walker's Building Estimator's Reference Book (29th Edition) to the test!

Here's the challenge:

25 Question Blitz: Answer 25 questions specifically crafted from the reference book in just 75 minutes. Time to show off your estimating knowledge!
Always Fresh: No two tests are ever the same! Each time you take it, you'll get a new set of questions to keep things interesting.
Free for All: This practice test is completely FREE! No need to break the bank to sharpen your skills. 🆓
Practice Makes Perfect: Didn't score as high as you'd like? No problem! Take the test as many times as you need until you feel confident tackling any estimating challenge, especially those on the Florida Roofing License exam!

So grab your favorite calculator, put on your thinking cap, and get ready to conquer those estimates! Good luck!

Please enter your following information to get started:

1 / 25

____________work is usually publicly advertised.

A) Commercial

B) Private

C) Competitive bidding

D) Public

2 / 25

Vermiculite is a mineral that expands, when heated, to about ___________ times its original size

A) 8

B) 10

C) 12

D) 14

3 / 25

Plans and elevations are usually drawn at no less than _______ .

A) 1/16" = 1' 0"

B) 1/8 " = 1 ' 0"

C) 3/16 = 1' 0"

D) 1/4" = 1' 0"

4 / 25

According to Walker's, which of the following statements is not correct?

A) total float is obtain by subtracting its' ES from its' LS time

B) total float is obtain by subtracting its' EF from its' ES time

C) the use of total float for one activity will reduce it by a like amount in other items

D) the activities in a chain share total float

5 / 25

________ is the amount of time for an activity, obtained by subtracting its early start (ES) from its late start (LS) or early finish (EF) from its late finish (LF).

A) Total float

B) Forward scheduling

C) Backward scheduling

D) Mean flow time

6 / 25

2600 L.F. of 2 x is ____________board feet. Select the closest answer.

A) 144

B) 650

C) 1,734

D) 2,600

7 / 25

Well point systems are typically used for dewatering excavations. For specific applications, the general contractor should ___________________ .

A) Consult an engineer

B) Consult a local dewatering contractor

C) Request the owner to include design in the project

D) Employ an architect to design the system

8 / 25

The process of constructing the temporary end of a masonry wall with the end stretcher of every alternate course projecting is known as __________________ .

A) Toothing

B) Stretching

C) Racking

D) Raking

9 / 25

If 450 bank cubic yards of dry sand is to be excavated, the number of loose cubic yards that will be excavated is ________cubic yards. Select the closet answer.

A) 450

B) 495

C) 501

D) 540

10 / 25

If an ASTM standard reinforcing bar has a diameter of 1.00 inch, then it would be classified a _______ bar.

A) #4

B) #5

C) #8

D) #9

11 / 25

If the lap is 4" wide and only a single thickness of felt is used, add about ___________ % to allow for laps and the additional felt required at the top and bottom of wall.

A) 0

B) 10

C) 15

D) 20

12 / 25

Most building departments require that plumbing drawings be submitted in __________________.

A) An isometric riser diagram

B) An orthographic projection

C) An oblique projection

D) A parabolic diagram

13 / 25

A ______________ bond is a bond assuring that the contractor will complete a project in accordance with plans and specs identified in the contract documents.

A) Performance

B) Bid

C) Maintenance

D) Surety

14 / 25

Any discrepancies on the plans or specifications or changes the architect or owner wish to make after the plans and specifications have been issued, but before bids are turned in, are incorporated in the ____________ .

A) Submittals

B) Change order

C) Construction change directive

D) Addenda

15 / 25

The standard tool for resource control in project scheduling which calculates the project completion date and dates for completion of project activities and intermediate milestones is the ________________________ .

A) Bar Chart

B) Genii Chart

C) Critical Path Method (CPM)

D) Master Network

16 / 25

A minor arch with a maximum span of 6 feet and a load not exceeding 1000 lb per foot is typically referred to as a ______________________ arch.

A) relieving

B) Jack arch

C) Trimmer arch

D) Back arch

17 / 25

The R value rating of a masonry wall constructed with 10" thick hollow concrete masonry units with a density of 100 pounds per cubic foot and the cores of the masonry blocks filled with perlite is _________.

A) R-3.5

B) R-4.8

C) R-6.3

D) R-7.6

18 / 25

The weight of 150' of 2-1/2" x 2-1/2" x 3/16" steel angles is __________ pounds. Select the closest answer

A) 2.08

B) 3.07

C) 225

D) 460.5

19 / 25

The principal objective of construction scheduling is to manage all of the following resources used in the construction process except for ______________.

A) Labor

B) Materials

C) Subcontractors

D) Cash flow

20 / 25

In an ordinary building foundation work, the most common type of pile to be used is _______________.

A) Precast concrete

B) Cast in place concrete

C) Driven wood

D) Jetted concrete

21 / 25

The area of a roof measuring 10 - - with a ¼ pitch and is ________ square feet. Select the closest answer.

A) 10,000

B) 10,965

C) 11,180

D) 11,632

22 / 25

A contractor can borrow money at 2 points above the current prime rate. This means that ___________.

A) The interest the contractor will be paying is 2% over treasury notes

B) The interest the contractor will be paying is deposits are currently paying is 2 points above whatever certificates of deposits are currently paying

C) The contractor is a preferred customer and the bank will charge him the prime rate of 2%

D) The interest the contractor will be paying is 2% over the prime rate

23 / 25

Construction drawings will generally depict details through the use of _______________.

A) Notes, schedules, symbols, elevations

B) Architects notes and manufacturer s reference

C) Written specifications and instruction to bidders

D) Addendum issued by the architect to the contractors

24 / 25

According to a set of plans, a contractor is to construct a residential structure that measures 40'x60' with a hip slope sloped at 5/12 slope. The total area of the roof is _________________ square feet. Select the closest answer.

A) 2,000

B) 2,400

C) 2,600

D) 3,000

25 / 25

Each of the following factors must be considered when estimating the costs for the excavation of a project. Generally, the easiest to quantify is the ___________________________.

A) Effects of groundwater

B) Slope of excavation

C) Volume of material to remove

D) Costs of pumping

Your score is

The average score is 36%

Check out all of the tests we offer at Contractor Practice Exam

Walker’s, Building Estimator’s Reference Book Free Test

« Older Entries

Next Entries »

View All

Contact Us



Contractor Practice Exam



Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

Check out all of the tests we offer at Contractor Practice Exam

Walker’s, Building Estimator’s Reference Book Free Test

AIA A201 Free Test

AIA A401 Free Test

AIA A701 Free Test

Florida Roofing Practice Test

Florida Free Roofing Practice Test

OSHA Free Practice Test

Minnesota Residential Roofer Practice Test

Free ICC F14 Roofing Contractor Test

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com

Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

Report a question

Check out all of the tests we offer at Contractor Practice Exam

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com