Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

Hey there, future license holder! We know you’re serious about getting that license, and we want to help you succeed. Whether your exam is open book or closed book, the key is getting familiar with the references recommended in the Candidate Information Bulletin (CIB). This will make you a whiz at finding information during the exam, regardless of the format.

Here’s the lowdown on how to conquer your studies:

Start Early, Reap the Benefits (Step 1):

Don’t wait until the last minute to cram! Aim to start studying at least 3-6 weeks beforehand. The earlier you begin, the more time your brain has to absorb and retain the information.

Step 2: Find Your CIB – Your Exam Roadmap:

Think of the CIB as your treasure map to exam success. It tells you everything you need to know about the specific areas your exam will focus on. You can find your CIB by visiting your state’s licensing board website or the exam provider’s website (often run by the state government). If you get stuck, don’t hesitate to reach out to us for help!

Step 3: Gear Up with the Right References:

We don’t sell reference materials ourselves, but we can be your friendly neighborhood guide. Our website has links to publishers, booksellers, and even free PDFs or HTML versions of references (and statutes) when available.

Step 4: Highlight Like a Pro (Step 4):

Once you have your references, use the CIB to identify the subject areas that will be covered on the exam. Highlight or tab these areas in your reference materials. You can even color-code them based on the importance (number of questions) mentioned in the CIB.

Step 5: Not All Codes Are Created Equal (Step 5):

Exam bulletins often reference large sections of code, but chances are, you won’t need to study everything. Focus on the sections that directly apply to your trade. For instance, if you’re taking a General Builder exam, any section of the building code would be relevant.

Step 6: Craft Your Study Schedule – Be Realistic (Step 6):

Grab a calendar and mark your exam date along with any other commitments you have. Be honest with yourself about how much study time you can realistically dedicate each day. Prioritize the subject areas based on their importance and how many questions they cover on the exam.

Avoid Burnout! Take Breaks!

Studying for long stretches can be overwhelming. Aim for study sessions of no more than two hours at a time. Take breaks in between to refresh your mind – grab a coffee, step outside, or do a quick brain break activity.

Step 7: Practice Makes Perfect (Almost!):

Our practice exams are a fantastic way to test your knowledge and get comfortable with the question format. When you take a practice exam, make notes on where you found the answers in the reference materials. This will help you solidify your understanding of the concepts.

Step 8: Learn Your Way:

We all learn differently! Some people learn best by seeing things written down (visual learners), others by hearing them (auditory learners), and some by doing hands-on activities (kinesthetic learners). Figure out what learning style works best for you and tailor your studying accordingly.

Step 9: Don’t Get Lost in the Notes:

Our practice tests are a great starting point, but don’t just rely on them blindly. Use the CIB’s subject area list to focus on the most relevant information. Don’t be afraid to explore the reference materials and make connections between different topics.

Step 10: Deep Dive with the Answer Key:

Most questions in our practice exams have an answer key with the exact citation from the reference material. Use this to your advantage! Highlight important information in your references and make notes to create a strong understanding of the concepts.

Step 11: Keep Your Notes Organized:

Don’t let your notes become a jumbled mess! Keep them all together – either write them directly on the printed materials or use the comment tool in a PDF file. Review your notes regularly, especially when revisiting the tabbed sections in your references.

Step 12: Embrace the Challenge, Decipher the Code:

Codes and legal documents can be tricky beasts, filled with complex sentences and legalese. Don’t get discouraged! Take the time to break down confusing sections and rewrite them in a way that makes sense to you.

Bonus Tip: Find a Code-Breaking Buddy:

Consider reaching out to a law student

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

/25

Walker's, Building Estimator's Reference Book, 29th Edition Free Test

Calling all Florida roofing aces! Want to see how well you can estimate like a pro? This FREE practice test is designed to put your skills using Walker's Building Estimator's Reference Book (29th Edition) to the test!

Here's the challenge:

25 Question Blitz: Answer 25 questions specifically crafted from the reference book in just 75 minutes. Time to show off your estimating knowledge!
Always Fresh: No two tests are ever the same! Each time you take it, you'll get a new set of questions to keep things interesting.
Free for All: This practice test is completely FREE! No need to break the bank to sharpen your skills. 🆓
Practice Makes Perfect: Didn't score as high as you'd like? No problem! Take the test as many times as you need until you feel confident tackling any estimating challenge, especially those on the Florida Roofing License exam!

So grab your favorite calculator, put on your thinking cap, and get ready to conquer those estimates! Good luck!

Please enter your following information to get started:

1 / 25

Plans and elevations are usually drawn at no less than _______ .

A) 1/16" = 1' 0"

B) 1/8 " = 1 ' 0"

C) 3/16 = 1' 0"

D) 1/4" = 1' 0"

2 / 25

Site clearing and grading are covered under Division ______ of the CSI Uniform System of Specifications.

A) 02

B) 10

C) 15

D) 21

3 / 25

A pneumatic tamper enables a worker to do nearly ____________ times the work he can do by hand.

A) Triple

B) Double

C) Quadruple

D) Ten times

4 / 25

Welded steel fabric with a 6"x6" mesh of 6 gauge wire will weigh _____ pounds per 100 sq. feet

A) 30

B) 42

C) 44

D) 49

5 / 25

____________ standard bricks are required to build an ft x 20 ft wall . Select the closest answer.

A) 1,333

B) 2,666

C) 3,999

D) 3,123

6 / 25

A ______________ bond is a bond assuring that the contractor will complete a project in accordance with plans and specs identified in the contract documents.

A) Performance

B) Bid

C) Maintenance

D) Surety

7 / 25

Money set aside to replace future equipment should be put into a separate fund know as a(an) __________ fund.

A) Future

B) Escrow fund

C) Equipment depreciation fund

D) Sinking fund

8 / 25

Which of the following is not an advantage to using Tilt-up wall panel construction?

A) Preplanning during casting encourages efficient installation of window units

B) Forming is basically limited to strip side forms

C) Field personnel will be unfamiliar with a new type of construction procedure, rejection and opposition will be encountered

D) Pre-casting panel makes it more difficult to train an efficient crew

9 / 25

In CPM scheduling, CPM stands for ___________ and will calculate two sets of dates for each activity, the _______________ finish and the Late Start-Late Finish.

A) Computer program method, Early Start Early Finish

B) Contracts per month, Early Start Early Finish

C) Cost program method, Early Start Early Finish

D) Critical path method, Early Start Early Finish

10 / 25

An AIA form __________ is used to furnish information needed to bid on public work.

A) A-305

B) A-101

C) A-201

D) A-701

11 / 25

After acquiring a piece of construction equipment, the contractor should _________________.

A) Divide the lease payments by the number of jobs in progress and charge each accordingly

B) Divide the annual depreciation by the number of estimated jobs for the year for a per-job charge

C) Develop an hourly rate charge, sufficient to cover interest charges and replacement costs

D) Develop a chargeable rate that is comparable to the local rental rates for similar equipment

12 / 25

The type of cost estimate where the estimator starts an entirely new cost estimate based on the items of work identified in the contract specifications and drawings is called the ____________.

A) Pre-design estimate

B) Conceptual estimate

C) Pre-construction Estimate 70%

D) Construction Cost Estimate 100%

13 / 25

A contractor can borrow money at 2 points above the current prime rate. This means that ___________.

A) The interest the contractor will be paying is 2% over treasury notes

B) The interest the contractor will be paying is deposits are currently paying is 2 points above whatever certificates of deposits are currently paying

C) The contractor is a preferred customer and the bank will charge him the prime rate of 2%

D) The interest the contractor will be paying is 2% over the prime rate

14 / 25

A contractor is buying a bundle of 2"x6"x8" long. The cost of the lumber is $0.25 per BF. If the cost of the bundle is $100, ______________pieces are in the bundle. Select the closest answer.

A) 100

B) 25

C) 50

D) 150

15 / 25

Equipment rental rates vary greatly throughout the country. It is standard practice to base rates on ________ hours per month.

A) 100

B) 150

C) 160

D) 176

16 / 25

According to Walker's Estimator's Reference Book, information on the nature or the thickness of underlying rock is usually obtained by _________________ .

A) Hand auger boring

B) Split spoon sampling

C) Core borings

D) Mining

17 / 25

The type of excavating equipment selected, as well as the size of the equipment required for a project, should be based on the ______________.

A) Driving distance to the job site

B) Availability of specific man power

C) Qualification of the equipment operator

D) Volume of material to be moved

18 / 25

Which one of these is not one of the three traditional methods of construction scheduling?

A) Project Schedule

B) Critical Path Method (CPM)

C) Bar (or Gantt) Charts

D) Program Evaluation and Review Technique (PERT)

19 / 25

An activity with zero float is called a _______.

A) Burst activity

B) Critical activity

C) Merge activity

D) None of the above

20 / 25

The typical dead weight of a ¾ inch piece of structural plywood is __________ lbs.

A) 12.8

B) 28

C) 38.4

D) 71

21 / 25

_______ is the material or masonry units forming a cap or finish on top of a wall and protects it from penetration of water from above.

A) Heading course

B) Soffit

C) Bond course

D) Coping

22 / 25

The average life expectancy of tires in construction work is from _______ to ________ hours.

A) 2,000 2,500

B) 2,500 3,000

C) 3,000 3,500

D) 3,500 4,000

23 / 25

A contractor has to excavate a drainage swale that is 200' long, 16' wide and has a depth of 2' with the ends vertical. If the soil to be removed is mud, the total volume of material to be removed from the job site would be _____________ cyd. Select the closest answer

A) 237

B) 142

C) 285

D) 119

24 / 25

Any discrepancies on the plans or specifications or changes the architect or owner wish to make after the plans and specifications have been issued, but before bids are turned in, are incorporated in the ____________ .

A) Submittals

B) Change order

C) Construction change directive

D) Addenda

25 / 25

The process of constructing the temporary end of a masonry wall with the end stretcher of every alternate course projecting is known as __________________ .

A) Toothing

B) Stretching

C) Racking

D) Raking

Your score is

The average score is 49%

Check out all of the tests we offer at Contractor Practice Exam

California B2 Residential Remodeling – Estimating Exam Prep

« Older Entries

Next Entries »

View All

Contact Us



Contractor Practice Exam



Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

Check out all of the tests we offer at Contractor Practice Exam

California B2 Residential Remodeling – Estimating Exam Prep

California B2 Residential Remodeling – Roofing Exam Prep

California B2 Residential Remodeling – Painting Exam Prep

California B2 Residential Remodeling – Rough Carpentry Exam Prep

California B2 Residential Remodeling – Flooring Exam Prep

California B2 Residential Remodeling – Finish Carpentry

California B2 Residential Remodeling – HVAC

California B2 Residential Remodeling – Plumbing

California B2 Residential Remodeling – Chimneys & Fireplaces Exam Prep

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com

Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

Report a question

Check out all of the tests we offer at Contractor Practice Exam

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com