California B2 Residential Remodeling – Rough Carpentry
Free Exam

(California)

Rough Carpentry – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Rough Carpentry. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

/15

California B2 Residential Remodeling - Rough Carpentry

Attention B2 Exam Takers! Sharpen your understanding of project limitations and legalities with our FREE 30-minute Rough Carpentry Challenge!

Boost Your B2 Knowledge:

15 Scenario-Based Questions: Test your ability to identify B2-permissible projects and those requiring a higher license.
Real-World Focus: Gain confidence in applying regulations to common remodeling situations.
Unlimited Attempts: Master the concepts at your own pace. Take the challenge as many times as needed!

Don't gamble on exam day! This challenge is the perfect way to assess your grasp of B2 Rough Carpentry and ensure you're ready to dominate the exam.

Take Control of Your B2 Journey - Start Your FREE Challenge Today!

Please enter your following information to get started:

1 / 15

What is the minimum number of nails required in a typical framing bracket?

A) 8

B) 1/2 of all holes provided must be used

C) check the listing with the IBC

D) see manufacturer's specifications

2 / 15

A header joist must be_____ when a partition is parallel.

A) eliminated

B) supported

C) doubled

D) braced

3 / 15

Stoop molding is used______.

A) to align a closed door

B) to align a window sash

C) to prevent a window sash from opening too high

D) None of the above

4 / 15

Joist hangers should be attached with______.

A) screws

B) staples

C) 16d nails

D) 8d nails

5 / 15

If the R.O. for a window is listed as 3’-6” x 3’-5”, the height of the rough opening would be______.

A) 3'-6"

B) 3'-5"

C) 3/4 inch larger

D) 1 inch

6 / 15

The minimum lap of a joist overlap is what distance?

A) 1-1/2 inches

B) 3 inches

C) 6 inches

D) 16 inches

7 / 15

What does a 48/24 stamp on a piece of plywood mean?

A) the maximum load supported

B) the metric measurement

C) the spacing of rafters and floor joists

D) the price of the plywood in Canadian and US Dollars

8 / 15

Which of the following would be classified as “rough hardware”?

A) gutter

B) hinge

C) lock

D) staple

9 / 15

What kind of saw is used to cut rafters?

A) Band saw

B) Reciprocating saw

C) Hand saw

D) Circular saw

10 / 15

Where would you find a hold-down bracket installed with a long bolt?

A) wall framing

B) roof framing

C) partition walls

D) floor framing

11 / 15

If floor joist are not large enough to support the span what must be done?

A) Add lag bolts

B) Add blocking

C) Add piers and columns

D) Increase the size of the rim joists

12 / 15

How many joists are required over a laundry room and family room 31 feet long at a center spacing of 16 inches o.c.?

A) 22

B) 23

C) 24

D) 25

13 / 15

What is the rough opening for a 3’0” door?

A) 41-1/2”

B) 39”

C) 38”

D) 36”

14 / 15

What is the maximum spacing of rafter ties?

A) 3’

B) 4’

C) 5'-4”

D) 6'

15 / 15

What is the rough opening for a standard exteror door height?

A) 3” wider, 5” higher

B) 3” wider, 4” higher

C) 3” wider, 3” higher

D) 3” wider, 2” higher

Your score is

The average score is 0%

How should I best prepare for the California B2 Residential Remodeling Exam?

Last Updated: November 9, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

Here’s a breakdown of how you can effectively prepare for the California B2 Residential Remodeling Exam:

Understand the Exam Structure:

The California State Licensing Board (CSLB) provides an official B2 Residential Remodeling Study Guide which outlines the exam format https://www.cslb.ca.gov/Resources/StudyGuides/B02StudyGuide.pdf.
The test is divided into six sections with corresponding weightings:
- Planning and Estimating (15%)
- Jobsite Preparation (13%)
- Core Trades Remodeling (25%) – Plumbing, Electrical, etc.
- Finish Trades Remodeling (18%) – Cabinets, Countertops, etc.
- Exterior Remodeling (13%) – Roof Repairs, etc.
- Safety (16%)

Acquire Study Materials:

CSLB Study Guide: This is a great starting point as it’s from the official source and covers all tested topics https://www.cslb.ca.gov/Resources/StudyGuides/B02StudyGuide.pdf.

Practice Tests:

Regularly take practice tests under timed conditions to simulate the actual exam environment and identify your weak areas. We offer a HUGE SELECTION of practice tests for your California B2 Residential Remodeling Exam many of which are free. Take a look here!
Focus on understanding why the correct answer is chosen and revise the incorrect ones thoroughly.

Focus on Key Areas:

While all sections are important, prioritize studying Core Trades (Plumbing, Electrical) which holds the highest weightage (25%).
Safety regulations (16%) are crucial as they directly impact jobsite wellbeing.

Additional Tips:

Brush up on your math skills as the exam may include basic calculations related to estimating and conversions.
Familiarize yourself with relevant California building codes like the California Building Code (CBC) and California Residential Code (CRC).
There’s no penalty for guessing, so it’s better to choose an answer than leaving it blank.

By following these steps and dedicating consistent study time, you can increase your chances of successfully passing the California B2 Residential Remodeling Exam.

Is there anything about Rough Carpentry on the California B2 Residential Remodeling Exam?

The California B2 Residential Remodeling Exam likely won’t have specific questions directly testing Rough Carpentry skills. Here’s why:

Focus of B2 License: The B2 license is designed for remodeling existing residential structures, not new construction. Rough carpentry is typically involved in framing new structures and isn’t a core competency for B2 projects
Exam Content: The CSLB B2 Residential Remodeling Study Guide https://www.cslb.ca.gov/Resources/StudyGuides/B02StudyGuide.pdf doesn’t list Rough Carpentry as a specific topic.

However, there might be indirect connections:

Remodeling Scope: While the exam won’t delve into building new frames, it might ask about identifying existing framing elements and potential remodeling limitations due to them
Understanding vs. Hands-on Skills: The exam might assess your knowledge of how rough carpentry elements like floor joists or wall studs function within a structure, but not necessarily require hands-on building skills.

In summary, focus your studies on the core B2 exam areas like planning, safety, and core trades (electrical, plumbing). If you encounter any questions related to existing framing during your exam, a basic understanding of its role would be helpful.

What is a question about Rough Carpentry that might be on the California B2 Residential Remodeling Exam?

While it’s unlikely to be directly tested on the B2 exam, here’s an example question that might touch on Rough Carpentry indirectly:

Question: You’re planning a bathroom remodel that involves moving a sink two feet to a different wall. What potential challenge might you encounter related to the existing framing behind the wall?

Answer Choices:

A. Not enough clearance for the new drainpipe.
B. The existing wall might not be strong enough to support the new sink. (Likely Answer)
C. Needing to remove and replace a large section of drywall.
D. The existing floor joists might need reinforcement for the new vanity.

This question tests your knowledge of how existing framing (specifically wall studs in this case) can impact remodeling projects. While it doesn’t require in-depth Rough Carpentry skills, it highlights the importance of understanding the structure’s framework when planning renovations.

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling Exam Prep

View All