California B2 Residential Remodeling – Walls Construction Free Exam

(California)

Walls Construction – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Walls Construction. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

/15

California B2 Residential Remodeling - Walls Construction

Attention B2 Exam Takers! Sharpen your understanding of project limitations and legalities with our FREE 30-minute Walls Construction Challenge!

Boost Your B2 Knowledge:

15 Scenario-Based Questions: Test your ability to identify B2-permissible projects and those requiring a higher license.
Real-World Focus: Gain confidence in applying regulations to common remodeling situations.
Unlimited Attempts: Master the concepts at your own pace. Take the challenge as many times as needed!

Don't gamble on exam day! This challenge is the perfect way to assess your grasp of B2 Walls Construction and ensure you're ready to dominate the exam.

Take Control of Your B2 Journey - Start Your FREE Challenge Today!

Please enter your following information to get started:

1 / 15

Braced wall lines with a length of__________ or less must have a min. of two braced wall panels of any length or one braced wall panel a min. of 48 inches.

A) 12 feet

B) 14 feet

C) 16 feet

D) 18 feet

2 / 15

The distance between adjacent edges of braced wall panels along a braced wall line must be a max. of _____.

A) 5 feet

B) 10 feet

C) 15 feet

D) 20 feet

3 / 15

What is the maximum allowable span of a Douglas fir-larch header for exterior bearing walls supporting a roof, a ceiling and two clear-span floors consisting of two 2 x 8s in a building having a width of 24 feet with a ground snow load of 50 psf?

A) 1 feet, 10 inches

B) 2 feet, 8 inches

C) 3 feet, 3 inches

D) 4 feet, 2 inches

4 / 15

What is the maximum allowable span of a Southern pine girder for exterior bearing walls supporting a roof, a ceiling and one clear-span floor consisting of four 2 x 8s in a building having a width of 12 feet with a ground snow load of 70 psf?

A) 5 feet, 10 inches

B) 6 feet, 1 inches

C) 7 feet, 0 inches

D) 8 feet, 2 inches

5 / 15

In cold-formed steel wall framing, web holes in wall studs and other structural members must have a min. distance between the edge of the bearing surface and the edge of the web hole of __________ .

Untitled 52 California B2 Residential Remodeling - Walls Construction Exam Prep

A) 5 inches

B) 10 inches

C) 15 inches

D) 20 inches

6 / 15

In wood wall framing, joists perpendicular to a braced wall panel above or below, must be provided with a __________ along the entire length of the braced wall panel in accordance with Figure R602.10.8(1).

A) rim joist

B) band joist

C) blocking

D) Any of the above

7 / 15

In wood wall framing, joists parallel to a braced wall panel above or below, must be provided with a __________ along the entire length of the braced wall panel in accordance with Figure R602.10.8(2).

A) rim joist

B) end joist

C) parallel framing member

D) Any of the above

8 / 15

If foundation cripple walls exceed__________ in height they must be framed using studs having the size required for an additional story.

A) 2 feet

B) 4 feet

C) 6 feet

D) 8 feet

9 / 15

In cold-formed steel wall framing, web holes in wall studs and other structural members must have a web hole length not exceeding__________ .

A) 1-1/2 inches

B) 2-1/2 inches

C) 3-1/2 inches

D) 4-1/2 inches

10 / 15

In wood wall framing, braced wall panels must be connected to__________ .

A) floor framing

B) foundation

C) Either A or B

D) Neither A nor B

11 / 15

Which of the following is a continuous sheathing method?

A) CS-WSP (Continuously sheathed wood structural panel)

B) PFG (Portal frame at garage)

C) HPS (Hardboard panel siding)

D) GB (Gypsum board)

12 / 15

Braced wall lines with a length greater than__________ must have a min. of two braced wall panels.

Untitled 50 California B2 Residential Remodeling - Walls Construction Exam Prep

A) 12 feet

B) 14 feet

C) 16 feet

D) 18 feet

13 / 15

In cold-formed steel wall framing, web holes in wall studs and other structural members must have a center-to-center spacing of__________ min.

A) 12 inches

B) 24 inches

C) 36 inches

D) 48 inches

14 / 15

Exterior walls parallel to a braced wall line must be offset a max. of__________ from the designated braced wall line location.

A) 2 feet

B) 4 feet

C) 6 feet

D) 8 feet

15 / 15

What is the maximum allowable span of a Douglas fir-larch girder for exterior bearing walls supporting a roof, a ceiling and one center-bearing floor consisting of three 2 x 10s in a building having a width of 24 feet with a ground snow load of 30 psf?

A) 6 feet, 6 inches

B) 7 feet, 2 inches

C) 8 feet, 9 inches

D) 9 feet, 10 inches

Your score is

The average score is 7%

What does the California B2 Residential Remodeling exam consist of?

Last Updated: November 5, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

The California B2 Residential Remodeling exam covers a variety of topics related to the field of residential remodeling. Here’s a breakdown of the major sections you can expect to be tested on:

Planning and Estimating (15%) – This section will test your knowledge on defining the scope of work, ensuring code compliance, identifying design and construction errors, interpreting plans and specifications, and estimating project costs for materials, labor, and equipment.
Job Site Preparation (13%) – This section covers tasks like safely removing non-load-bearing walls, cabinets, and countertops.
Building Materials and Methods (22%) – This section will test your knowledge of different building materials, their properties, and appropriate uses. You’ll also be tested on various construction methods used in residential remodeling.
Construction Details (22%) – This section dives into specific construction details like framing techniques, roof systems, floor systems, wall construction, and installation of doors and windows.
Codes and Standards (18%) – This section assesses your understanding of relevant California building codes and standards that apply to residential remodeling projects.
Business and Legal Issues (10%) – This section covers important business and legal topics for contractors, such as contracts, permits, inspections, worker safety, and insurance requirements.

The California Contractors State License Board (CSLB) provides an official B-2 Residential Remodeling Study Guide that goes into more detail about these topics and offers sample test questions https://www.cslb.ca.gov/contractors/applicants/examination_study_guides/.

Remember, the exam is multiple-choice with four answer options, and a calculator will be provided for any questions requiring calculations. There’s no penalty for guessing, so it’s best to give an answer for every question.

Does the California B2 Residential Exam have questions about Walls Construction?

Yes, the California B2 Residential Remodeling Exam does cover Walls Construction.

The Building Materials and Methods (22%) section likely includes questions about wall construction materials like studs, drywall, insulation, and soundproofing.
The Construction Details (22%) section is more likely to have in-depth questions about wall construction. This might include questions on:
- Different framing techniques for walls (e.g., wood stud walls, metal stud walls)
- Proper installation methods for various wall components
- Techniques for soundproofing walls
- Fire-rated wall assemblies

What could be a question about floors that would be on the California B2 Exam?

Here’s an example of a question on wall construction that you might encounter on the California B2 Residential Remodeling Exam:

Question:

You are remodeling a bathroom and need to install a new shower stall. The existing wall behind the planned shower is a non-load bearing interior wall framed with 2×4 studs at 16″ on center. What additional materials would you typically need to properly prepare this wall for a shower installation?

Possible Answers:

A. Hammer drill and masonry screws
B. Vapor barrier, cement board, and waterproof sealant
C. Steel lintel and additional studs for reinforcement
D. Soundproofing insulation and thicker drywall

Answer: The best answer is B. Vapor barrier, cement board, and waterproof sealant.

Explanation:

For a shower application, the wall needs to be waterproofed to prevent moisture damage. While the other answer choices might be used in other wall construction scenarios, they are not specifically required for waterproofing a shower wall behind the tile.

A. Hammer drill and masonry screws are typically used for attaching things to concrete or masonry, not for shower wall preparation.
C. Steel lintels and additional studs are used for reinforcing load-bearing walls or creating larger openings, not for shower wall prep.
D. Soundproofing insulation and thicker drywall might be used in other parts of the bathroom remodel but not for waterproofing the shower area.

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling Exam Prep

View All