California B2 Residential Remodeling – Building Planning Free Exam

(California)

Building Planning – Needed for B2 License

Welcome to the timed free practice exam on California B2 Residential Remodeling focusing on Building Planning. When you are ready, please start the test below. If you want a peek at how are tests work, try our California Health and Safety test for free here!

/15

California B2 Residential Remodeling - Building Planning

Attention B2 Exam Takers! Sharpen your understanding of project limitations and legalities with our FREE 30-minute Building Planning Challenge!

Boost Your B2 Knowledge:

15 Scenario-Based Questions: Test your ability to identify B2-permissible projects and those requiring a higher license.
Real-World Focus: Gain confidence in applying regulations to common remodeling situations.
Unlimited Attempts: Master the concepts at your own pace. Take the challenge as many times as needed!

Don't gamble on exam day! This challenge is the perfect way to assess your grasp of B2 Building Planning and ensure you're ready to dominate the exam.

Take Control of Your B2 Journey - Start Your FREE Challenge Today!

Please enter your following information to get started:

1 / 15

True or False: Carbon monoxide alarms must be installed outside of each separate sleeping area in the immediate vicinity of the bedrooms.

A) True

B) False

2 / 15

What is maximum walkline radius of a spiral stairway?

A) 24-1/2 inches

B) 26-1/2 inches

C) 28-1/2 inches

D) 30-1/2 inches

3 / 15

Accessibility requirements for Group R-3, set forth in Chapter 11 of the IBC, must be applied to single residential structures that have__________ or more dwelling or sleeping units.

A) 1

B) 2

C) 3

D) 4

4 / 15

Handrails with a circular cross section must have an outside diameter of________.

A) 1 ” Min. to 1 -1/2" Max

B) 1-1/4” Min. to 2" Max

C) -1/2" Min. to 3” Max

D) 1-3/4” Min. to 4” Max

5 / 15

The width of a Type II (non-circular) handrail above the recess must be__________ .

A) 1” Min. to 2” Max.

B) 1-1/4” Min. to 2-3/4” Max

C) 1-1/2” Min. to 2-1/2” Max

D) 1-3/4" Min. to 3" Max.

6 / 15

Mezzanines must be open and unobstructed to the room in which they are located, except for walls not more than__________ in height, columns and posts.

A) 24 inches

B) 36 inches

C) 48 inches

D) 60 inches

7 / 15

Photovoltaic systems must comply with the provisions of__________ .

A) CRC R324.3.1 - R324.7.1

B) California Electrical Code

C) Both A and B

D) Either A or B

8 / 15

Photovoltaic arrays that occupy more than 33% of the plan view total roof area must have an_________ min. clear setback on both sides of a horizontal ridge.

A) 18-inch

B) 24-inch

C) 30-inch

D) 36-inch

9 / 15

Photovoltaic arrays that occupy 33% or less of the plan view total roof area must have an ________ min. clear setback on both sides of a horizontal ridge.

A) 12-inch

B) 18-inch

C) 24-inch

D) 30-inch

10 / 15

In address identification, each character must be a min. of__________ in height.

A) 2 inches

B) 4 inches

C) 6 inches

D) 8 inches

11 / 15

Guards must be located along open-sided walking surfaces, that are located more than__________ measured vertically to the floor or grade below at any point within 36 inches horizontally to the edge of the open side.

A) 30 inches

B) 36 inches

C) 42 inches

D) 48 inches

12 / 15

Foam plastic used in building construction must have a smoke-developed index of not more than _____.

A) 400

B) 450

C) 500

D) 550

13 / 15

What is the required minimum height of guards at open-sided walking surfaces?

A) 30 inches

B) 36 inches

C) 42 inches

D) 48 inches

14 / 15

What is the required minimum clear width of spiral stairways?

A) 24 inches

B) 26 inches

C) 28 inches

D) 30 inches

15 / 15

The aggregate area of a mezzanine must not be greater than of the floor area of the room where it is located.

A) one-eighth

B) one-fourth

C) one-third

D) one-half

Your score is

The average score is 0%

Why do I need a California B2 Residential Remodeling License?

Last Updated: November 5, 2024

0.0

0.0 out of 5 stars (based on 0 reviews)

Let us know what you think!

There are two main reasons why you might need a California B2 Residential Remodeling License:

Legally operate your business: A B2 license is required by law if you want to operate a business in California that specializes in renovations and home improvement projects that don’t involve structural framing or rough carpentry [CA.gov CSLB B2 Classification PDF]. This license ensures you meet the qualifications to perform this type of work.
Consumer protection and increased opportunity: Having a B2 license assures consumers that you are a qualified professional and increases your credibility. This can help you win more jobs and compete on a level playing field with other licensed contractors.

What do I need to know about Building Planning for the California B2 Exam

The California B2 exam focuses on residential remodeling, and Building Planning is a key area covered in the Planning and Estimating section (15%). Here’s what you need to know:

Scope of Work and Code Compliance: You’ll need to understand how to interpret project plans and specifications to identify the scope of work. This includes recognizing potential code violations and ensuring your project adheres to relevant California building codes.
Design and Construction Error Identification: Being able to identify errors in plans and specifications is crucial. This could involve spotting missing details, structural inconsistencies, or elements that wouldn’t comply with building codes.
Understanding Construction Documents: Familiarity with construction documents like shop drawings, architectural plans, and engineering calculations is essential. You should be able to interpret these documents to understand the project’s design intent and ensure proper construction.
Field Inspection Performance: The exam might assess your knowledge of performing field inspections. This could involve identifying existing construction deficiencies or confirming that the project aligns with the plans and specifications.
Project Coordination: A B2 contractor needs to understand how to effectively coordinate with different trades involved in the remodeling project. The exam may touch upon scheduling, communication, and ensuring everyone involved is on the same page.
Cost Estimation: Basic construction cost estimation is necessary for B2 contractors. You should be able to estimate material, equipment, and labor costs to create a realistic project budget.

Resources for Studying Building Planning:

The California Contractors State License Board (CSLB) doesn’t provide specific study materials, but their website offers a general B2 exam content breakdown (https://www.cslb.ca.gov/contractors/applicants/examination_study_guides/).
Textbooks and online resources on residential construction and project management can provide valuable background knowledge on Building Planning concepts.

Remember, the B2 exam focuses on practical application of knowledge. When studying Building Planning, think about how you’d use this knowledge in real-world remodeling scenarios.

What are some questions about Building Planning that may be on the California B2 exam?

Here are some example questions on Building Planning you might encounter on the California B2 exam:

Scope of Work and Code Compliance:

You are reviewing the plans for a bathroom remodel. The plans call for installing a new shower stall, but don’t specify the drain location. How should you proceed?
- A. Install the drain in the most convenient location.
- B. Contact the homeowner for their preference.
- C. Review the California Building Code (CBC) for shower drain placement requirements.
- D. Proceed with installation, assuming a standard drain location.

Design and Construction Error Identification:

A set of plans for a kitchen remodel shows a load-bearing wall scheduled for removal. What should you do?
- A. Remove the wall as planned.
- B. Contact the designer to confirm the wall isn’t load-bearing.
- C. Install a support beam before removing the wall.
- D. Inform the homeowner the wall removal is not possible.

Understanding Construction Documents:

A window symbol on the architectural plans has a specific alphanumeric code. What information does this code likely represent?
- A. The paint color for the window frame.
- B. The window manufacturer and model number.
- C. The window size and opening style.
- D. The warranty information for the window.

Field Inspection Performance:

During a pre-construction inspection of a bathroom remodel project, you discover a significant amount of water damage behind the existing shower enclosure. What should you do next?
- A. Document the damage and inform the homeowner.
- B. Proceed with demolition as planned.
- C. Ignore the damage as it’s not part of the scope of work.
- D. Instruct the homeowner to fix the damage themselves.

Project Coordination:

You are managing a kitchen remodel project that involves electrical work, plumbing modifications, and new cabinetry. How can you ensure smooth coordination between the different trades?
- A. Delegate tasks and let each trade work independently.
- B. Hold regular meetings with all involved parties to discuss schedules and potential challenges.
- C. Let the homeowner communicate directly with each trade.
- D. Each trade should submit their own independent project schedule.

Cost Estimation:

A homeowner asks for a rough estimate for a bathroom remodel that includes replacing the tile floor, bathtub, and vanity. What factors should you consider when creating your estimate?
- A. Only the cost of materials.
- B. Only the labor costs for installation.
- C. The cost of materials, labor, and potential demolition costs.
- D. The homeowner’s desired budget for the project.

Remember, these are just examples. The actual exam questions may differ in format and difficulty.

Related To California B2 Residential Remodeling Licensing

California B2 Residential Remodeling Exam Prep

View All