Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

Hey there, future license holder! We know you’re serious about getting that license, and we want to help you succeed. Whether your exam is open book or closed book, the key is getting familiar with the references recommended in the Candidate Information Bulletin (CIB). This will make you a whiz at finding information during the exam, regardless of the format.

Here’s the lowdown on how to conquer your studies:

Start Early, Reap the Benefits (Step 1):

Don’t wait until the last minute to cram! Aim to start studying at least 3-6 weeks beforehand. The earlier you begin, the more time your brain has to absorb and retain the information.

Step 2: Find Your CIB – Your Exam Roadmap:

Think of the CIB as your treasure map to exam success. It tells you everything you need to know about the specific areas your exam will focus on. You can find your CIB by visiting your state’s licensing board website or the exam provider’s website (often run by the state government). If you get stuck, don’t hesitate to reach out to us for help!

Step 3: Gear Up with the Right References:

We don’t sell reference materials ourselves, but we can be your friendly neighborhood guide. Our website has links to publishers, booksellers, and even free PDFs or HTML versions of references (and statutes) when available.

Step 4: Highlight Like a Pro (Step 4):

Once you have your references, use the CIB to identify the subject areas that will be covered on the exam. Highlight or tab these areas in your reference materials. You can even color-code them based on the importance (number of questions) mentioned in the CIB.

Step 5: Not All Codes Are Created Equal (Step 5):

Exam bulletins often reference large sections of code, but chances are, you won’t need to study everything. Focus on the sections that directly apply to your trade. For instance, if you’re taking a General Builder exam, any section of the building code would be relevant.

Step 6: Craft Your Study Schedule – Be Realistic (Step 6):

Grab a calendar and mark your exam date along with any other commitments you have. Be honest with yourself about how much study time you can realistically dedicate each day. Prioritize the subject areas based on their importance and how many questions they cover on the exam.

Avoid Burnout! Take Breaks!

Studying for long stretches can be overwhelming. Aim for study sessions of no more than two hours at a time. Take breaks in between to refresh your mind – grab a coffee, step outside, or do a quick brain break activity.

Step 7: Practice Makes Perfect (Almost!):

Our practice exams are a fantastic way to test your knowledge and get comfortable with the question format. When you take a practice exam, make notes on where you found the answers in the reference materials. This will help you solidify your understanding of the concepts.

Step 8: Learn Your Way:

We all learn differently! Some people learn best by seeing things written down (visual learners), others by hearing them (auditory learners), and some by doing hands-on activities (kinesthetic learners). Figure out what learning style works best for you and tailor your studying accordingly.

Step 9: Don’t Get Lost in the Notes:

Our practice tests are a great starting point, but don’t just rely on them blindly. Use the CIB’s subject area list to focus on the most relevant information. Don’t be afraid to explore the reference materials and make connections between different topics.

Step 10: Deep Dive with the Answer Key:

Most questions in our practice exams have an answer key with the exact citation from the reference material. Use this to your advantage! Highlight important information in your references and make notes to create a strong understanding of the concepts.

Step 11: Keep Your Notes Organized:

Don’t let your notes become a jumbled mess! Keep them all together – either write them directly on the printed materials or use the comment tool in a PDF file. Review your notes regularly, especially when revisiting the tabbed sections in your references.

Step 12: Embrace the Challenge, Decipher the Code:

Codes and legal documents can be tricky beasts, filled with complex sentences and legalese. Don’t get discouraged! Take the time to break down confusing sections and rewrite them in a way that makes sense to you.

Bonus Tip: Find a Code-Breaking Buddy:

Consider reaching out to a law student

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

/25

Walker's, Building Estimator's Reference Book, 29th Edition Free Test

Calling all Florida roofing aces! Want to see how well you can estimate like a pro? This FREE practice test is designed to put your skills using Walker's Building Estimator's Reference Book (29th Edition) to the test!

Here's the challenge:

25 Question Blitz: Answer 25 questions specifically crafted from the reference book in just 75 minutes. Time to show off your estimating knowledge!
Always Fresh: No two tests are ever the same! Each time you take it, you'll get a new set of questions to keep things interesting.
Free for All: This practice test is completely FREE! No need to break the bank to sharpen your skills. 🆓
Practice Makes Perfect: Didn't score as high as you'd like? No problem! Take the test as many times as you need until you feel confident tackling any estimating challenge, especially those on the Florida Roofing License exam!

So grab your favorite calculator, put on your thinking cap, and get ready to conquer those estimates! Good luck!

Please enter your following information to get started:

1 / 25

Under the Uniform System developed by the Construction Specifications Institute (CSI) Division 2 includes ___________.

A) General requirements

B) Subsurface Investigation

C) Concrete

D) Finishes

2 / 25

The principal objective of a construction schedule is to _______________________.

A) Support claims against the owner

B) Assist architect in planning project completion

C) Efficiently manage resources in order to complete within the estimated time and costs for the project

D) Track progress of all subcontractors on the project

3 / 25

A blueprint shows a rectangular building lot that scales out a 15.0" by 22.5". The scale given for the site plan is 1" = 12'. The area of the building lot is ______________ square feet. Select the closest answer.

A) 4,860

B) 33,750

C) 48,600

D) 53,460

4 / 25

Modular face bricks with a nominal brick size of 2 2/3" x 4" x 8" are to be used to face a 2,500 square foot wall without headers. _________bricks will be required for this job. Select the closest answer.

A) 13,675

B) 15,224

C) 16,055

D) 16,875

5 / 25

Architects and Engineers specify that fill material is to be placed in layers from ___________ inches and to compact each layer with some sort of roller or tamping equipment.

A) 4 - 6

B) 4 12

C) 6 12

D) 8 12

6 / 25

When excavating sandy clay/moist loam using a hydraulic tractor (crawler) backhoe with a 1-1/4 cubic yard bucket, an average of cubic yards can be excavated per 8-hour day. Select the closest answer.

A) 600

B) 720

C) 900

D) 1,080

7 / 25

_____________are drawings in which all horizontal and vertical lines have true length and vertical lines are vertical but horizontal lines are set at 30 degrees or -30 degrees.

A) Obliques

B) Schematics

C) Isometrics

D) Orthographics

8 / 25

In CPM scheduling, CPM stands for ___________ and will calculate two sets of dates for each activity, the _______________ finish and the Late Start-Late Finish.

A) Computer program method, Early Start Early Finish

B) Contracts per month, Early Start Early Finish

C) Cost program method, Early Start Early Finish

D) Critical path method, Early Start Early Finish

9 / 25

If #3 reinforcement bars are to be lapped a minimum of 30 times the bar diameter, the minimum length of bar lap is inches. Select the closest answer.

A) 8

B) 9

C) 11

D) 11.25

10 / 25

According to Walker's Estimator's Reference Book, information on the nature or the thickness of underlying rock is usually obtained by _________________ .

A) Hand auger boring

B) Split spoon sampling

C) Core borings

D) Mining

11 / 25

Most working drawings for building construction are based on ____________.

A) Structural specifications

B) Perspective

C) Orthographic projection

D) Isometrics

12 / 25

According to Walker's Estimator's Reference Book, modifications issued after contract is signed are called a(n) _________________.

A) Addenda

B) Letter

C) Change order

D) Oral or verbal directive

13 / 25

A vertical plane represented by an orthographic projection of the outside building is a (an) _________________ .

A) Isometric drawing

B) Plan view

C) Section

D) Elevation

14 / 25

In estimating quantities of excavation and concrete, both are measured by the cubic yard. One cubic yard contains _______ cubic feet.

A) 3

B) 9

C) 12

D) 27

15 / 25

A standard, non-modular brick is ____ long.

A) 8"

B) 10"

C) 11"

D) 12"

16 / 25

Money set aside to replace future equipment should be put into a separate fund know as a(an) __________ fund.

A) Future

B) Escrow fund

C) Equipment depreciation fund

D) Sinking fund

17 / 25

The terms CPM and PERT pertain to __________________.

A) The specifications

B) Scheduling

C) The inventory

D) Contract performance management

18 / 25

A contractor has to excavate a drainage swale that is 200' long, 16' wide and has a depth of 2' with the ends vertical. If the soil to be removed is mud, the total volume of material to be removed from the job site would be _____________ cyd. Select the closest answer

A) 237

B) 142

C) 285

D) 119

19 / 25

The ___________method of drilling can only be used for preliminary investigations for foundations.

A) Hand auger

B) Core boring

C) Manifold

D) Split Spoon Sampling

20 / 25

Once a loan is approved and accepted, ____________ is (are) NOT considered a closing cost (s).

A) Points

B) Interest

C) Origination fees

D) Discounts

21 / 25

A ______________ bond is a bond assuring that the contractor will complete a project in accordance with plans and specs identified in the contract documents.

A) Performance

B) Bid

C) Maintenance

D) Surety

22 / 25

A contractor is building a house with a hip roof. The slope of the roof is 5/12. The plan dimensions of the house are 40'x60'. Assuming a 10% waster factor, the contractor should order ___ sheets of plywood.

A) 90

B) 80

C) 100

D) 70

23 / 25

The type of excavating equipment selected, as well as the size of the equipment required for a project, should be based on the ______________.

A) Driving distance to the job site

B) Availability of specific man power

C) Qualification of the equipment operator

D) Volume of material to be moved

24 / 25

The convenience outlet symbol is defined to be a ________.

A) Fixture outlet

B) Range

C) Flanged tee-down

D) All of the above

25 / 25

Plans and elevations are usually drawn at no less than _______ .

A) 1/16" = 1' 0"

B) 1/8 " = 1 ' 0"

C) 3/16 = 1' 0"

D) 1/4" = 1' 0"

Your score is

The average score is 36%

Check out all of the tests we offer at Contractor Practice Exam

ICC G18 Residential Electrician Practice Exam

« Older Entries

View All

Contact Us



Contractor Practice Exam



Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

Check out all of the tests we offer at Contractor Practice Exam

ICC G18 Residential Electrician Practice Exam

Free Florida Plumbing License Practice Exam

California C-5 Practice Exam

Free Ugly’s Electrical Reference Exam

Florida Plumbing License Practice Exam

Florida Business and Finance Exam – Quick Practice

ICC T16 Master Electrician Practice Exam

Florida Business and Finance Exam – Free Practice

Florida Roofing License Practice Exam – Updated for 2024

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com

Conquering Your License Exam

Ace Your License Exam: A Step-by-Step Study Guide

See how much knowledge you have with our Walker’s Builders Estimator’s Reference Test

Report a question

Check out all of the tests we offer at Contractor Practice Exam

Contact Us

Contractor Practice Exam

admin@contractorpracticeexam.com